EDIT: Added location info.
I've been away from diyAudio for quite some time after work and life got busy. Now I need to relocate for work on short notice, and I need to downsize. It's time to let the half-dozen half-baked project ideas go to folks who are more likely to do something with the materials. Really, I should have done this a long time ago.
Right now, I'm just looking to move a whole bunch of drivers. They take up the most space. Don't really know how to price all this stuff, so please just make a reasonable offer, otherwise this stuff is going in the trash and that will suck. But it's not moving with me. Be sure to account for the actual cost of shipping from 98682. Some of them are a bit heavy, but I'd say I could probably ship any one set to you anywhere in the USA for about $25, maybe less. I will give you the lowest actual cost I can get for ground shipping through either USPS or UPS. Let me know if you have a preference for one service or another.
Local meetup in the Portland, OR metro area is OK.
Payment via PayPal
Everything has been stored in its original packaging indoors in climate-controlled environments, but please note that most of this stuff is probably 15 years old.
I didn't want to overload this post with pix, but you can see pix of everything here:
diyAudio For Sale (imgur)
DM me or post a reply to this message if you're interested in anything.
Thanks for helping me clear out my closet!! I'll be sure to update this post as things get claimed.
FOR SALE
----------------
SOLD Qty. 8 Dayton Audio DA135-8 5" Al Cone Woofer
SOLD Qty. 4 Dayton Audio DA175-8 7" Al Cone Woofer
Qty. 4 Tang Band W3-1335SB 8 Ohm Titanium Cone Full Range
Qty. 2 Hi-Vi B4N Al Cone Midbass
Qty. 4 Tang Band W3-315E Al/Mg 8 Ohm Full-Range
Qty. 4 Tang Band W3-593S 8 Ohm Paper Cone/Al Phase Plug Full Range
I've been away from diyAudio for quite some time after work and life got busy. Now I need to relocate for work on short notice, and I need to downsize. It's time to let the half-dozen half-baked project ideas go to folks who are more likely to do something with the materials. Really, I should have done this a long time ago.
Right now, I'm just looking to move a whole bunch of drivers. They take up the most space. Don't really know how to price all this stuff, so please just make a reasonable offer, otherwise this stuff is going in the trash and that will suck. But it's not moving with me. Be sure to account for the actual cost of shipping from 98682. Some of them are a bit heavy, but I'd say I could probably ship any one set to you anywhere in the USA for about $25, maybe less. I will give you the lowest actual cost I can get for ground shipping through either USPS or UPS. Let me know if you have a preference for one service or another.
Local meetup in the Portland, OR metro area is OK.
Payment via PayPal
Everything has been stored in its original packaging indoors in climate-controlled environments, but please note that most of this stuff is probably 15 years old.
I didn't want to overload this post with pix, but you can see pix of everything here:
diyAudio For Sale (imgur)
DM me or post a reply to this message if you're interested in anything.
Thanks for helping me clear out my closet!! I'll be sure to update this post as things get claimed.
FOR SALE
----------------
SOLD Qty. 8 Dayton Audio DA135-8 5" Al Cone Woofer
SOLD Qty. 4 Dayton Audio DA175-8 7" Al Cone Woofer
Qty. 4 Tang Band W3-1335SB 8 Ohm Titanium Cone Full Range
Qty. 2 Hi-Vi B4N Al Cone Midbass
Qty. 4 Tang Band W3-315E Al/Mg 8 Ohm Full-Range
Qty. 4 Tang Band W3-593S 8 Ohm Paper Cone/Al Phase Plug Full Range
Last edited:
Good evening. How much do you want for a pair of the Tang Band W3-1335SB 8 ohm Titanium Drivers. Pictures? Thanks Jeff
How fortunate that I'm your neighbor to the south! I'm always looking for a deal on driver's. I'll probably make an offer for the woofers. I'll PM you in a few hours.
Sent you a DM. Pics are at the IMGUR link in the original post. There are too many to post in-thread.
An interesting speaker, with its 1-2W power handling and 80-ish db output at full power.
Yeah...I don't remember what I wanted to do with all of these different speakers, but I do remember wanting to build like mini line arrays as computer speakers. With a mini-sub to fill in the low end (the TB W5-1138SG)