Does anyone know where I can get this size of audio capacitor?

[Phillip15]

7500uF or higher, 56V or higher.
Case size diameter 30mm or smaller, Height - not important

to replace 7500 56V caps in my amplifier 20+ years old!

Ta

 

[kevinkr]

Somewhere like Farnell or Radiospares would be the places I would start looking.

 

[Phillip15]

Somewhere like Farnell or Radiospares would be the places I would start looking.

Not here in the UK! needs to be an 'audio' capacitor.

 

[KatieandDad]

All these three are 35mm in Diameter, is that close enough ?

Buy 8200uF 63V online from RS Components

If you go down to 6800uF 63V you can get them at 25mm Diameter.

http://uk.rs-online.com/web/p/aluminium-capacitors/7395386/

Bearing in mind the huge tolerances of Electrolytic caps, 6800uF may be OK.

 

[Phillip15]

All these three are 35mm in Diameter, is that close enough ?

Buy 8200uF 63V online from RS Components

Thanks anyway but needs to be 30mm or less, as otherwise they won't fit

🙂

 

[Phillip15]

It's ok, found some!

 

[xjr100]

7500uF or higher, 56V or higher.
Case size diameter 30mm or smaller, Height - not important

to replace 7500 56V caps in my amplifier 20+ years old!

Ta

Where they used?
Mundorf have MLGO63-10000uF (63V), they sized d=30mm and height =50mm: Electrolytic capacitor Mundorf MLytic AG glue on 10000 uF 63VDC 125C 2pin - Fidelity Components Shop

But check specifications if they can provide current you need.

 

[Phillip15]

Where they used?
Mundorf have MLGO63-10000uF (63V), they sized d=30mm and height =50mm: Electrolytic capacitor Mundorf MLytic AG glue on 10000 uF 63VDC 125C 2pin - Fidelity Components Shop

But check specifications if they can provide current you need.

Thanks anyway 😉 but after a long search I finally found some. They're for a kenwood KA-4020 Amp.

Cheers