Hi,
So wanna test myself and see if I can pull of a fully custom audio interface with a headphone amplifier for driving 250ohm headphones. An ADC to support XLR mics. And maybe hopefully use a USB-C interface for that. Anyone got any ideas or recommendations. I am looking for a recommendation for IC/s
So wanna test myself and see if I can pull of a fully custom audio interface with a headphone amplifier for driving 250ohm headphones. An ADC to support XLR mics. And maybe hopefully use a USB-C interface for that. Anyone got any ideas or recommendations. I am looking for a recommendation for IC/s
This was not designed for headphones but shows how to use a CS4272 audio codec with a USB in/out module.
https://www.diyaudio.com/community/...-for-measuring-amplifiers.363385/post-6421403
https://www.diyaudio.com/community/...-for-measuring-amplifiers.363385/post-6421403
There are many solutions for USB<>I2S interfaces, with different quality.
For High Speed USB: XMOS, Amanero, CM663x, TE8802, CT76xx, etc.
For Full Speed USB: TE7022, PCM2706, etc.
For High Speed USB: XMOS, Amanero, CM663x, TE8802, CT76xx, etc.
For Full Speed USB: TE7022, PCM2706, etc.