What are the DIY Guides?
The DIY Guides are to help you get started in the world of do-it-yourself audio.
Topics covered range from soldering and wiring to aluminium construction and everything in between.
Articles
SurfaceMountDeviceRework by hifiZen - has good experience so please read carefully. Thanks for a very fine contribution.
NEW Is your system user friendly? Can you sit in your seat and turn it all on/off with just one button?
Related DIYAudio Wiki Pages
(Include related Wiki pages from this site)
Links
[A collection of free amplifier schematic diagram; loudspeaker cabinet design plan and turntable, phono pre-amplifier, tonearm & DAC information.]
[A lot of DIY projects - Altec Lansing A5, Audio Note Ongaku, Pass Labs Aleph 5, etc.]
[About QUAD ESL63 Electrostatic Loudspeaker] - DIY Diagnose, Service, Repair with free schematic and CD.
http://www.kpsec.freeuk.com/compon.htm An introduction into electronics, Basic circuits, Component identification / Testing, Soldering.
http://audiotube.atspace.com - Audio Tubes Information.
http://www.vimeo.com/1725654 - How to make 4 line inputs to a Zoom H2 recorder.
The DIY Guides are to help you get started in the world of do-it-yourself audio.
Topics covered range from soldering and wiring to aluminium construction and everything in between.
Articles
SurfaceMountDeviceRework by hifiZen - has good experience so please read carefully. Thanks for a very fine contribution.
NEW Is your system user friendly? Can you sit in your seat and turn it all on/off with just one button?
Related DIYAudio Wiki Pages
(Include related Wiki pages from this site)
Links
[A collection of free amplifier schematic diagram; loudspeaker cabinet design plan and turntable, phono pre-amplifier, tonearm & DAC information.]
[A lot of DIY projects - Altec Lansing A5, Audio Note Ongaku, Pass Labs Aleph 5, etc.]
[About QUAD ESL63 Electrostatic Loudspeaker] - DIY Diagnose, Service, Repair with free schematic and CD.
http://www.kpsec.freeuk.com/compon.htm An introduction into electronics, Basic circuits, Component identification / Testing, Soldering.
http://audiotube.atspace.com - Audio Tubes Information.
http://www.vimeo.com/1725654 - How to make 4 line inputs to a Zoom H2 recorder.
Last edited by a moderator:
Dear folks,
Am a new member to this site so forgive me if sound stupid!
I have a problem with the disc reading on the above unit. It will load the 5 cds into the multichanger and then change each one as requested. But the tells me "No Disc". What is most likely the problem? Is it that the cd reader is bust or is it that some other mechanism is not "notifying the cd reader of the disc and so giving the all clear to start".
Would be pleased to hear from you and if you which is broken where I can get a replacement part.
Thank you for your help.
Look forward to hearing.
Am a new member to this site so forgive me if sound stupid!
I have a problem with the disc reading on the above unit. It will load the 5 cds into the multichanger and then change each one as requested. But the tells me "No Disc". What is most likely the problem? Is it that the cd reader is bust or is it that some other mechanism is not "notifying the cd reader of the disc and so giving the all clear to start".
Would be pleased to hear from you and if you which is broken where I can get a replacement part.
Thank you for your help.
Look forward to hearing.
Oddly, you posted this somewhere I doubt anyone but me has ever seen it.
Go to this site's homepage and to the appropriate forum from there...
- keantoken
Go to this site's homepage and to the appropriate forum from there...
- keantoken
- Status
- Not open for further replies.