Hey guys. I'm building a DIY DSP upmixer from an ADSP-21489 development board. It has individual PCM1798 DAC boards for each 2 outputs.
I'd like to replace the 4 2-channel output boards with a dual PCM1794 diy board.
Here's a link to the parallel 1794 board I'd like to use.
PCM1794A 1794 dual parallel PCM1794 decoder board fever DAC H256|Digital-to-Analog Converter| - AliExpress
Here's a picture of the board that comes with the DSP development board.
Any ideas if this would even work? If so. Can anyone offer some guidance. I'm capable of doing the mechanical work. I just wouldn't know where to start with identifying pins and such.
I'd like to replace the 4 2-channel output boards with a dual PCM1794 diy board.
Here's a link to the parallel 1794 board I'd like to use.
PCM1794A 1794 dual parallel PCM1794 decoder board fever DAC H256|Digital-to-Analog Converter| - AliExpress
Here's a picture of the board that comes with the DSP development board.
Any ideas if this would even work? If so. Can anyone offer some guidance. I'm capable of doing the mechanical work. I just wouldn't know where to start with identifying pins and such.