Elma makes some brackets, which allow mounting on a panel. I don't think they deliver the 19" panel, at least not as a standard product.
The brackets are shown at the bottom of page 9 in this Guardbox 33
Whether it can support the weight of the RTX6001, I don't know. The RTX6001 uses a box, which is slightly longer than the standard products.
The brackets are shown at the bottom of page 9 in this Guardbox 33
Whether it can support the weight of the RTX6001, I don't know. The RTX6001 uses a box, which is slightly longer than the standard products.
I love this Analyzer. But i haven't been putting it to enough use and wont have time in the foreseeable future.
Hence putting this up for sale.
This has the mod/updates that were recommended by Jens.
I will include the Virtins dongle for their Analyzer software for RTX6001.
Asking $1250 + shipping (For 1 Unit RTX6001 + Security Dongle for Virtins Multi-Sim Analyzer software)
Hence putting this up for sale.
This has the mod/updates that were recommended by Jens.
I will include the Virtins dongle for their Analyzer software for RTX6001.
Asking $1250 + shipping (For 1 Unit RTX6001 + Security Dongle for Virtins Multi-Sim Analyzer software)
Hello. I'm Kurt from Denmark.
I want to buy it and can pay via PayPal
My mail is andersen.kurt1@gmail.com
+45 53 21 17 77
Br kurt
Shipping to friend in Boulder who can bring it over
I want to buy it and can pay via PayPal
My mail is andersen.kurt1@gmail.com
+45 53 21 17 77
Br kurt
Shipping to friend in Boulder who can bring it over
Hello. I'm Kurt from Denmark.
I want to buy it and can pay via PayPal
My mail is andersen.kurt1@gmail.com
+45 53 21 17 77
Br kurt
Hello,
I would like to buy it from you
Please contact me on
Andersen.kurt1@gmail.com
Or +45 53 21 17 77
Shipping to my friend in Boulder Colorado who can bring it over
Br kurt
My apologies. I think i posted this incorrectly on this thread.
@admin please remove these posts.
I will directly follow up with interested parties through private messages.
@admin please remove these posts.
I will directly follow up with interested parties through private messages.
Does anyone also experienced the following behavior of the RTX6001: While the RTX is running and I switch off the RTX and on again, the RTX is blocked and I can't restart it. The only way to fire it up again is by means a reboot (of the PC ). Is there something like a reset command (of the RTX) to prevent the necessity of a total reboot?
Cheers,
E.
Cheers,
E.
Last edited:
Is this a Windows thing? Is Windows tying up the USB connection while trying to re-establish communications?
Probably you are right. When I disconnect the USB cable (and reconnect it) The RTX works again (i.e. without reboot).
OK, thats the Thesycon driver. I am looking for the built-in firmware version.
You can read out the (XMOS) firmware version with the RTX6001 Attenuation Control Application. You can download it here:
https://www.rtx.dk/support/download-center/
With this you can control the attenuators from the PC and check the firmware version.
You can read out the (XMOS) firmware version with the RTX6001 Attenuation Control Application. You can download it here:
https://www.rtx.dk/support/download-center/
With this you can control the attenuators from the PC and check the firmware version.
I'm sorry Jens. I hope this is what you are looking for: v1.19 (according the attenuation control).
Cheers,
E.
Cheers,
E.
Yes, that is what I was looking for. V1.19 is the latest, so it should be OK. In that case I have no explanation for the issue you have. We had a similar problem with the V1.14 and earlier, but it was fixed in V1.15.
You could of course try to update the Thesycon driver to the V4.82, which is also available on the download page. I don't know if it will solve the problem though.
You could of course try to update the Thesycon driver to the V4.82, which is also available on the download page. I don't know if it will solve the problem though.
Thanks Jens. I have just installed the new Thesycon driver, but still the same issue. However it's not a serious problem, now that I know it can be simply solved by plugging-out and -in the USB cable.
I believe I also experienced such lockups a few times in the past, but not on a regular basis. I am using the RTX with a Linux machine. Unplugging and replugging the USB cable always solved the issue for me.