yes, turns on and i see it output voltage from the relay.
A allaroundsound Member Joined 2011 2012-02-14 2:26 am #41 2012-02-14 2:26 am #41 yes, turns on and i see it output voltage from the relay. ••• More options Share P Perry Babin Member Joined 2003 bcae1.com 2012-02-14 2:31 am #42 2012-02-14 2:31 am #42 Does the voltage on the speaker terminals drop when you touch the speaker wires to the speaker terminals when it's playing? ••• More options Share A allaroundsound Member Joined 2011 2012-02-14 2:41 am #43 2012-02-14 2:41 am #43 no drop in voltage. Black probe @ main ground/ flluke ac setting. ••• More options Share A allaroundsound Member Joined 2011 2012-02-14 2:58 am #44 2012-02-14 2:58 am #44 going to resolder all pots at the preamp stage ••• More options Share A allaroundsound Member Joined 2011 2012-02-14 3:15 am #45 2012-02-14 3:15 am #45 bad low pass pot. i dont think resoldering will fix it. does mouser carry a replacement? normal looking pot, has 4 blue in color sections on the back. currently working great. thanks for the help. ••• More options Share A allaroundsound Member Joined 2011 2012-02-14 3:21 am #46 2012-02-14 3:21 am #46 perhaps in the morning ill take a picture of the pot. thanks again. ••• More options Share A allaroundsound Member Joined 2011 2012-04-09 3:48 am #47 2012-04-09 3:48 am #47 never finished this thread, but the 1500.1 has been repaired and in use for awhile. Thanks for all who helped. ••• More options Share Prev 1 2 3 First Prev 3 of 3 Go to page Go Show hidden low quality content Status This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button. Share: Facebook Twitter Reddit Pinterest Tumblr WhatsApp Email Share Link Home General Interest Car Audio Diamond Audio D6 1500.1
P Perry Babin Member Joined 2003 bcae1.com 2012-02-14 2:31 am #42 2012-02-14 2:31 am #42 Does the voltage on the speaker terminals drop when you touch the speaker wires to the speaker terminals when it's playing? ••• More options Share A allaroundsound Member Joined 2011 2012-02-14 2:41 am #43 2012-02-14 2:41 am #43 no drop in voltage. Black probe @ main ground/ flluke ac setting. ••• More options Share A allaroundsound Member Joined 2011 2012-02-14 2:58 am #44 2012-02-14 2:58 am #44 going to resolder all pots at the preamp stage ••• More options Share A allaroundsound Member Joined 2011 2012-02-14 3:15 am #45 2012-02-14 3:15 am #45 bad low pass pot. i dont think resoldering will fix it. does mouser carry a replacement? normal looking pot, has 4 blue in color sections on the back. currently working great. thanks for the help. ••• More options Share A allaroundsound Member Joined 2011 2012-02-14 3:21 am #46 2012-02-14 3:21 am #46 perhaps in the morning ill take a picture of the pot. thanks again. ••• More options Share A allaroundsound Member Joined 2011 2012-04-09 3:48 am #47 2012-04-09 3:48 am #47 never finished this thread, but the 1500.1 has been repaired and in use for awhile. Thanks for all who helped. ••• More options Share Prev 1 2 3 First Prev 3 of 3 Go to page Go Show hidden low quality content Status This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button. Share: Facebook Twitter Reddit Pinterest Tumblr WhatsApp Email Share Link
Does the voltage on the speaker terminals drop when you touch the speaker wires to the speaker terminals when it's playing?
A allaroundsound Member Joined 2011 2012-02-14 2:41 am #43 2012-02-14 2:41 am #43 no drop in voltage. Black probe @ main ground/ flluke ac setting. ••• More options Share A allaroundsound Member Joined 2011 2012-02-14 2:58 am #44 2012-02-14 2:58 am #44 going to resolder all pots at the preamp stage ••• More options Share A allaroundsound Member Joined 2011 2012-02-14 3:15 am #45 2012-02-14 3:15 am #45 bad low pass pot. i dont think resoldering will fix it. does mouser carry a replacement? normal looking pot, has 4 blue in color sections on the back. currently working great. thanks for the help. ••• More options Share A allaroundsound Member Joined 2011 2012-02-14 3:21 am #46 2012-02-14 3:21 am #46 perhaps in the morning ill take a picture of the pot. thanks again. ••• More options Share A allaroundsound Member Joined 2011 2012-04-09 3:48 am #47 2012-04-09 3:48 am #47 never finished this thread, but the 1500.1 has been repaired and in use for awhile. Thanks for all who helped. ••• More options Share Prev 1 2 3 First Prev 3 of 3 Go to page Go Show hidden low quality content Status This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button. Share: Facebook Twitter Reddit Pinterest Tumblr WhatsApp Email Share Link
A allaroundsound Member Joined 2011 2012-02-14 2:58 am #44 2012-02-14 2:58 am #44 going to resolder all pots at the preamp stage ••• More options Share A allaroundsound Member Joined 2011 2012-02-14 3:15 am #45 2012-02-14 3:15 am #45 bad low pass pot. i dont think resoldering will fix it. does mouser carry a replacement? normal looking pot, has 4 blue in color sections on the back. currently working great. thanks for the help. ••• More options Share A allaroundsound Member Joined 2011 2012-02-14 3:21 am #46 2012-02-14 3:21 am #46 perhaps in the morning ill take a picture of the pot. thanks again. ••• More options Share A allaroundsound Member Joined 2011 2012-04-09 3:48 am #47 2012-04-09 3:48 am #47 never finished this thread, but the 1500.1 has been repaired and in use for awhile. Thanks for all who helped. ••• More options Share Prev 1 2 3 First Prev 3 of 3 Go to page Go Show hidden low quality content Status This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button. Share: Facebook Twitter Reddit Pinterest Tumblr WhatsApp Email Share Link
A allaroundsound Member Joined 2011 2012-02-14 3:15 am #45 2012-02-14 3:15 am #45 bad low pass pot. i dont think resoldering will fix it. does mouser carry a replacement? normal looking pot, has 4 blue in color sections on the back. currently working great. thanks for the help. ••• More options Share A allaroundsound Member Joined 2011 2012-02-14 3:21 am #46 2012-02-14 3:21 am #46 perhaps in the morning ill take a picture of the pot. thanks again. ••• More options Share A allaroundsound Member Joined 2011 2012-04-09 3:48 am #47 2012-04-09 3:48 am #47 never finished this thread, but the 1500.1 has been repaired and in use for awhile. Thanks for all who helped. ••• More options Share Prev 1 2 3 First Prev 3 of 3 Go to page Go Show hidden low quality content Status This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button. Share: Facebook Twitter Reddit Pinterest Tumblr WhatsApp Email Share Link
bad low pass pot. i dont think resoldering will fix it. does mouser carry a replacement? normal looking pot, has 4 blue in color sections on the back. currently working great. thanks for the help.
A allaroundsound Member Joined 2011 2012-02-14 3:21 am #46 2012-02-14 3:21 am #46 perhaps in the morning ill take a picture of the pot. thanks again. ••• More options Share A allaroundsound Member Joined 2011 2012-04-09 3:48 am #47 2012-04-09 3:48 am #47 never finished this thread, but the 1500.1 has been repaired and in use for awhile. Thanks for all who helped. ••• More options Share Prev 1 2 3 First Prev 3 of 3 Go to page Go Show hidden low quality content Status This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.
A allaroundsound Member Joined 2011 2012-04-09 3:48 am #47 2012-04-09 3:48 am #47 never finished this thread, but the 1500.1 has been repaired and in use for awhile. Thanks for all who helped. ••• More options Share
never finished this thread, but the 1500.1 has been repaired and in use for awhile. Thanks for all who helped.