This thread is closed. It is purely for storing images that are used in the "So you want to design your own speaker from scratch!" thread to get around the limit of 10 attached images per post.
The images are attached to this thread and then inlined in the above mentioned thread.
The images are attached to this thread and then inlined in the above mentioned thread.
Attachments
-
Vented_31L_params.png59.2 KB · Views: 28,403
-
step_comparison.png52.2 KB · Views: 23,797
-
comparison.png27 KB · Views: 23,756
-
sealed_10L_step.png26.9 KB · Views: 23,909
-
Vented_31L_step.png29.5 KB · Views: 23,948
-
Vented_31L_port.png30.5 KB · Views: 24,175
-
Vented_22L_excursion.png32 KB · Views: 24,705
-
Vented_31L_excursion.png32 KB · Views: 25,066
-
Vented_31L_SPL.png45.7 KB · Views: 25,427
-
Vented_22L_params.png57.9 KB · Views: 26,168
Last edited:
more images.
Attachments
-
22L_big_port_spl.png57.4 KB · Views: 25,129
-
22L_big_port_step.png34.6 KB · Views: 23,136
-
baffle_diffraction_demo.gif285.6 KB · Views: 22,345
-
spl_trace.gif325.6 KB · Views: 21,393
-
IEC baffle.jpg88.7 KB · Views: 13,285
-
IEC_Baffle_diffraction.png14.5 KB · Views: 13,067
-
IEC_baffle_setup.png36.1 KB · Views: 13,087
-
baffle_loss_calcualtor.png58.4 KB · Views: 13,127
-
subtracting_IEC.png68.7 KB · Views: 13,109
Last edited:
crossover demo images.
Attachments
-
2nd_order_lr_textbook.png8.9 KB · Views: 14,402
-
2nd_order_lr_textbook_response_real_drivers_real_impedances.png23.1 KB · Views: 14,364
-
2nd_order_lr_textbook_response_flat_drivers_real_impedances.png21.2 KB · Views: 14,443
-
2nd_order_lr_textbook_response_flat_drivers.png20.2 KB · Views: 14,466
-
2nd_order_lr_textbook_response_real_drivers_real_impedances_with_taregts.png25.5 KB · Views: 14,346
-
custom_2nd_order_lr_rev_simple.png19.3 KB · Views: 14,156
-
custom_2nd_order_lr_rev_null.png19.9 KB · Views: 14,220
-
custom_2nd_order_lr_phase.png26.5 KB · Views: 14,155
-
custom_vs_textbook.png20.5 KB · Views: 14,240
-
custom_crossover.png12.8 KB · Views: 14,218
More images for Design your own speaker from scratch thread.
Attachments
-
Our_baffle_229mm_loss.png14.9 KB · Views: 12,797
-
Our_baffle_229mm.png36.4 KB · Views: 12,958
-
Our_baffle_287mm_loss.png15.2 KB · Views: 12,834
-
Our_baffle_287mm.png37.5 KB · Views: 13,016
-
sb17_comparisons.png21.5 KB · Views: 12,893
-
our_287mm_baffle.png70.1 KB · Views: 12,963
-
tweeter_229mm_1.PNG73.6 KB · Views: 12,767
-
tweeter_229mm_2.PNG73.3 KB · Views: 13,168
-
tweeter_229mm_3.PNG72.8 KB · Views: 12,681
Last edited:
tcpip's images for the box construction post in the Design your own speaker from scratch thread
Attachments
-
woofer-box-with-bracing.jpg462.8 KB · Views: 19,479
-
bevelled-midrange-cutout.png23.2 KB · Views: 19,475
-
woofer-box-brace-side-2_0.jpg197.8 KB · Views: 19,659
-
woofer-box-braces.png8.5 KB · Views: 19,336
-
woofer-box-internals.png41.1 KB · Views: 19,465
-
woofer-box-plan.png31.1 KB · Views: 19,679
-
box-with-braces-2_0.jpeg14.9 KB · Views: 19,519
-
exploded.png31.8 KB · Views: 19,617
-
internals.png25.4 KB · Views: 19,892
-
plan.png46.2 KB · Views: 20,044
tcpip's images for the box construction post in the Design your own speaker from scratch thread
Attachments
- Status
- Not open for further replies.
- Home
- Loudspeakers
- Multi-Way
- designing a speaker from scratch images thread