Hi,
I have the above amp that was stuck in protection mode (red flashing LED). I removed the covers and saw the main reservoir caps on the PSU were swollen, so I replaced those and all the other electrolytics on the power board and for a few days, it seemed to work ok. This morning, it's dropped back into protection mode without anything connected to it.
Does anyone have any ideas where I should look to try and get to the bottom of this? I've measured all output devices and they seem to be fine (speakers are also ok).
Also, does anyone have the full service manual for this model?
Thanks
I have the above amp that was stuck in protection mode (red flashing LED). I removed the covers and saw the main reservoir caps on the PSU were swollen, so I replaced those and all the other electrolytics on the power board and for a few days, it seemed to work ok. This morning, it's dropped back into protection mode without anything connected to it.
Does anyone have any ideas where I should look to try and get to the bottom of this? I've measured all output devices and they seem to be fine (speakers are also ok).
Also, does anyone have the full service manual for this model?
Thanks
Try this--- don't know if it will work. My web access is very erratic. Found via Google.
https://manualmachine.com/denon/avr3802/199272-service-manual/
https://manualmachine.com/denon/avr3802/199272-service-manual/