Hi all,
I have a built DDDac to sell, all working perfectly. I had simply assembled them on a piece of board, and ran them from some paralleled SLA batteries. This one comes with a USB module and the SPDIF receiver so you can accept both inputs and chose between them at a flick of a switch. There are extra caps in the PS of the DAC towers, blackgates and an elna at the USB module. It really is a lovely sounding dac, but my system has changed and it has sat now for too long unused.
Lots of info at DDDAC 2000. I have full schematics etc, but really, you probably won't need them as the units are built. Still might be handy if you want to do some modding.
What is included:
USB>I2S module
SPDIF receiver
2 x DAC boards
2 x DAC tower tooling
tent clock
total cost to buy new: €363/USD$~500
I'm looking for €220/$300 plus shipping. I'll go figure out shipping and post some figures back here, but I guarantee that it will be actual cost only. Paypal is AOK, and I suppose if you're in the euro zone, bank transfer might be easiest. I haven't ever sold much stuff here (my bank balance tells me its all buying) but have never had a problem yet.
I have it set up with some GE film caps on the outputs, and a simple connector for the PS (I can include easily the mating connector so you can try it with batteries if you like. The only thing you'll need to add is a simple switch which allows you to short two pins on the SPDIF receiver together - this allows switching on the fly between the USB and SPDIF inputs.
Some pics included....
Fran
I have a built DDDac to sell, all working perfectly. I had simply assembled them on a piece of board, and ran them from some paralleled SLA batteries. This one comes with a USB module and the SPDIF receiver so you can accept both inputs and chose between them at a flick of a switch. There are extra caps in the PS of the DAC towers, blackgates and an elna at the USB module. It really is a lovely sounding dac, but my system has changed and it has sat now for too long unused.
Lots of info at DDDAC 2000. I have full schematics etc, but really, you probably won't need them as the units are built. Still might be handy if you want to do some modding.
What is included:
USB>I2S module
SPDIF receiver
2 x DAC boards
2 x DAC tower tooling
tent clock
total cost to buy new: €363/USD$~500
I'm looking for €220/$300 plus shipping. I'll go figure out shipping and post some figures back here, but I guarantee that it will be actual cost only. Paypal is AOK, and I suppose if you're in the euro zone, bank transfer might be easiest. I haven't ever sold much stuff here (my bank balance tells me its all buying) but have never had a problem yet.
I have it set up with some GE film caps on the outputs, and a simple connector for the PS (I can include easily the mating connector so you can try it with batteries if you like. The only thing you'll need to add is a simple switch which allows you to short two pins on the SPDIF receiver together - this allows switching on the fly between the USB and SPDIF inputs.
Some pics included....
Fran
Attachments
Last edited:
- Status
- This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.