DD M2c

[mnhiphop101]

I have -12v dc on the mosfet legs that should have 0 in the output section

 

[Perry Babin]

High side, low side?

Which terminals?

With or without the driver transistors?

 

[mnhiphop101]

It's on both high and low sides.
Going off of the amp main ground
With driver transistors

 

[mnhiphop101]

Its present with or without the driver card in

 

[Perry Babin]

What if you use the secondary ground as the reference?

 

[mnhiphop101]

If I use the secondary everything reads as it should

 

[Perry Babin]

Does the secondary ground have 12v on it?

Is the transformer shorted between the primary and the secondary?

 

[mnhiphop101]

Ok so I think I was mistakenly using the power terminal as ground and that's why I was seeing -12v. When I go off of the main ground its reading .6v where there should be 0v. It's also present on the neg. Speaker terminal as dc offset.