Ok,
I am looking for datasheets on a 2SK389 JFET...
Looking for good input JFET's that have low distortion and have a gain around 10 with an unbypassed source resistor.
Going to be DC coupled to a BC549 running at 20mA.
Considering Cascode on input.... comments?
Thanks!!
I am looking for datasheets on a 2SK389 JFET...
Looking for good input JFET's that have low distortion and have a gain around 10 with an unbypassed source resistor.
Going to be DC coupled to a BC549 running at 20mA.
Considering Cascode on input.... comments?
Thanks!!
Here's the datasheet: http://katalogi.iele.polsl.gliwice.pl/data/Toshiba/docs/e001543.pdf
And you should take a look at this thread:
http://www.diyaudio.com/forums/showthread.php?s=&threadid=12754
And you should take a look at this thread:
http://www.diyaudio.com/forums/showthread.php?s=&threadid=12754
http://www.klaus-boening.de/html/transistors.html#2SK289
http://www.ne.jp/asahi/evo/amp/device/2sk389.pdf
there are others ...
Other links that may be useful to visit:
http://www.klaus-boening.de/html/lab_page.html
http://www.vacuumstate.com/fet_offer.htm
mlloyd1
(who is practicing on his harry holler imitations 😉 )
http://www.ne.jp/asahi/evo/amp/device/2sk389.pdf
there are others ...
Other links that may be useful to visit:
http://www.klaus-boening.de/html/lab_page.html
http://www.vacuumstate.com/fet_offer.htm
mlloyd1
(who is practicing on his harry holler imitations 😉 )
harry holler imitations
Only if you p*ss someone off (enough to leave the forum if you really want do it right) and we know your too much of a gentleman for that.
Only if you p*ss someone off (enough to leave the forum if you really want do it right) and we know your too much of a gentleman for that.
- Status
- Not open for further replies.