Would like to ask is there any grounding issue in my circuit? Currently running 6n6p SRPP.
Your help is highly appreciated.
Thank you for your time and consideration.
Earth Ground
1. Connected to chassis
2. Transformer screening – analog
and digital
3. AC Tube heater
Chassis ground
1. Power supply caps
2. Signal ground
Signal ground
1. Digital ground to rca ground
2. Rca ground
3. Tube pin9 ground
4. Resistor cathode ground
Digital ground not earthed.
Your help is highly appreciated.
Thank you for your time and consideration.
Earth Ground
1. Connected to chassis
2. Transformer screening – analog
and digital
3. AC Tube heater
Chassis ground
1. Power supply caps
2. Signal ground
Signal ground
1. Digital ground to rca ground
2. Rca ground
3. Tube pin9 ground
4. Resistor cathode ground
Digital ground not earthed.
If you have signal ground connected to chassis and earth you have a perfect ground loop opportunity. Isolate the electronics from the chassis with a thermistor or diode bridge or something.
If you have signal ground connected to chassis and earth you have a perfect ground loop opportunity. Isolate the electronics from the chassis with a thermistor or diode bridge or something.
I did remove the earth from signal ground still the same.
- Status
- Not open for further replies.