I'm guessing these were made by DDS horns, they are laminated fiberglass with balsa wood inside the layers for added strength and dampening. There are for standard two inch throat four bolt drivers. One has some blue paint around the back of the mounting flange and the other has a wooden mounting flange, otherwise the horns are identical.
Each horn throat feeds half of the horn separately, not a manifold or Y type of horn throat.
Each horn measures 21 1/2 inches wide, 11 inches tall and 14 3/4 inches deep.
I'm going to guess the dispersion pattern is something like 60 X 40.
$100 for the pair.
Figure the shipping cost could around $90 depending on your location.
Shipping would be from 45318 Ohio.
Let me know if you have any questions, I'm open to offers.
Thanks
Mike C.
Each horn throat feeds half of the horn separately, not a manifold or Y type of horn throat.
Each horn measures 21 1/2 inches wide, 11 inches tall and 14 3/4 inches deep.
I'm going to guess the dispersion pattern is something like 60 X 40.
$100 for the pair.
Figure the shipping cost could around $90 depending on your location.
Shipping would be from 45318 Ohio.
Let me know if you have any questions, I'm open to offers.
Thanks
Mike C.
Attachments
Last edited:
- Status
- This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.