Are there any members here or do you guys know anyone in the Midwest who is reasonably priced and can build curved edge enclosures like shown here:
Smart Corners by Mobile Solutions - Tool Overview - YouTube
I'm considering doing a home theater subwoofer enclosure build and I want it not to look like a standard box in my living room.
I'm hopping to build something with a >90deg round corner to sort of mimic my old trusty infinity kappa 8.1 mains.
Infinity Kappa x.1i und x.2i Serie
I want the enclosure made primarily from 1" Baltic birch, with obvious use of MDF in the corners. I need a 22" height front baffle, (total cabinet height 22.5" with 1/2" rubber feet). and total net volume of 4.5cu-ft after internal bracing and driver displacement of .34cu-ft. and the driver has a 16" mounting depth. I want the cabinet with minimal height, reasonably low depth and vary the width of the front baffle and the angle on the curved front corners to accommodate the volume necessary to reach the target 4.5cu-ft net.
If anyone here is willing to build an enclosure for me or can recommend a reasonably priced person/shop in the IL/IN/WI/IA area feel free to reply here. I have a few other feelers out there. Hopefully I can find someone good with pricing within reach. Thanks!
Smart Corners by Mobile Solutions - Tool Overview - YouTube
I'm considering doing a home theater subwoofer enclosure build and I want it not to look like a standard box in my living room.
I'm hopping to build something with a >90deg round corner to sort of mimic my old trusty infinity kappa 8.1 mains.
Infinity Kappa x.1i und x.2i Serie
I want the enclosure made primarily from 1" Baltic birch, with obvious use of MDF in the corners. I need a 22" height front baffle, (total cabinet height 22.5" with 1/2" rubber feet). and total net volume of 4.5cu-ft after internal bracing and driver displacement of .34cu-ft. and the driver has a 16" mounting depth. I want the cabinet with minimal height, reasonably low depth and vary the width of the front baffle and the angle on the curved front corners to accommodate the volume necessary to reach the target 4.5cu-ft net.
If anyone here is willing to build an enclosure for me or can recommend a reasonably priced person/shop in the IL/IN/WI/IA area feel free to reply here. I have a few other feelers out there. Hopefully I can find someone good with pricing within reach. Thanks!