If you want an original Crown one then you need the Crown part number which will be in the manual, however there have been several XLS revisions over just a few years.
You can download service manuals with parts lists from the Crown website.
I hope Crown spares are easier to obtain in belgium than in the UK! Isn't it just a standard pot? Or cant you use one?
You can download service manuals with parts lists from the Crown website.
I hope Crown spares are easier to obtain in belgium than in the UK! Isn't it just a standard pot? Or cant you use one?
You can find schematic of crown in post #69
http://www.diyaudio.com/forums/solid-state/164093-100w-ultimate-fidelity-amplifier-7.html
Regards
http://www.diyaudio.com/forums/solid-state/164093-100w-ultimate-fidelity-amplifier-7.html
Regards
I have the schematic you can have with pleasure but it doesn't show the front panel pots, only the main board.
If you email Crown in the US they will email you whatever you want, but you must tell them the serial number of the amplifier.
The man you need is here:
kevin.heber@harman.com
If you email Crown in the US they will email you whatever you want, but you must tell them the serial number of the amplifier.
The man you need is here:
kevin.heber@harman.com
- Status
- This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.