Does anybody know a good crossover between these units?
Just to give me a quick start, final crossover will be tuned further. I want to use them open baffle.
Just to give me a quick start, final crossover will be tuned further. I want to use them open baffle.
Did you make this speaker
I too and intrigued by the Neo 3 and Neo 8. Have you progressed on this speaker combination? Please let me know.
I too and intrigued by the Neo 3 and Neo 8. Have you progressed on this speaker combination? Please let me know.
I'm working on a speaker with a Neo3, two Neo8PDR's and a Scanspeak 25W. Filter middle/high will be passive and low / middle will be active.
I have the wood in house and first parts are glued to getter.
I have the wood in house and first parts are glued to getter.
Yep, I'm interested too.
Don't know where but I think I've read somewhere that someone was using the 8 from 400Hz up to 5kHz, where the 3 takes over.
Don't know where but I think I've read somewhere that someone was using the 8 from 400Hz up to 5kHz, where the 3 takes over.
How is the sound of the Neo 3?
I have an very old heavily modified T120 K in the ML-TQWP's, might replace it. But to be honest, i want an all new diy speaker....
I have made a quick design with a d'appolito around a dipole radiating Neo 3, and two alu mid bass drivers. A 60 degr. cone on backside of Neo helps radiating the sound through room.
And as you see in avatar, made some 360 degrees radiating tweeters from simple dome's too.
I have an very old heavily modified T120 K in the ML-TQWP's, might replace it. But to be honest, i want an all new diy speaker....
An externally hosted image should be here but it was not working when we last tested it.
I have made a quick design with a d'appolito around a dipole radiating Neo 3, and two alu mid bass drivers. A 60 degr. cone on backside of Neo helps radiating the sound through room.
And as you see in avatar, made some 360 degrees radiating tweeters from simple dome's too.
Jeroen, are you thinking about bi-amping the final speaker or didi you use the 4th orde active x-ver just to test the performance of the NEO8?
I'm going to use an amp for low and an amp for mid/high. Low is divided form mid/high via an active -24db Thel filter and mid and high are divided passively.
Also DIY amps?
Keep us up to date, this is a very interesting project. 🙂
(You're not going to Breda?)
Keep us up to date, this is a very interesting project. 🙂
(You're not going to Breda?)
I will.
Bass enclosures are almost ready. I just have to make the holes, but I have to go on a business trip first. After that I also have to do the open baffle for the Neo's. Next weekend I hope to do some work!
What is in Breda?
Bass enclosures are almost ready. I just have to make the holes, but I have to go on a business trip first. After that I also have to do the open baffle for the Neo's. Next weekend I hope to do some work!
What is in Breda?
. What is it and when is it taking place?
My last project wasn't too "special" either, but to the audience it sounded "special" for sure. (in a good way that is 😀 , 
)
Sometimes there are some real surprises in very simple projects.
)Sometimes there are some real surprises in very simple projects.
I was thinking about new developments. Like the dipole of Jeroen_d. Of course "normal" speakers can be very special to (nothing wrong with them), but some "new" ways on such a day would be nice to share.
What was your project?
What was your project?
- Status
- Not open for further replies.