Hi All,
Can anyone recommend a good enclosure
for the above besides those that's in diyparadise
website ? I like Scott Moose Half Chang design
but I guest it would not work without a redesign
which I'm not qualified to do in the first place.
thanks
Can anyone recommend a good enclosure
for the above besides those that's in diyparadise
website ? I like Scott Moose Half Chang design
but I guest it would not work without a redesign
which I'm not qualified to do in the first place.
thanks
'fraid not, it won't. It'd need a dedicated design & the main problem with the Corals is that they've been defunct for many years, and there are no specs. available, unless you can measure your own.
Hi Scott,
Thank you for the reply.
I've got some specs here which I'm told
is quite accurate.
Fo 54 hz
Qms 7.312
Qes 0.52738
Qts 0.4919
Vas 60.319 L
Would greatly appreciate if you could kindly advice.
Thank you again
Thank you for the reply.
I've got some specs here which I'm told
is quite accurate.
Fo 54 hz
Qms 7.312
Qes 0.52738
Qts 0.4919
Vas 60.319 L
Would greatly appreciate if you could kindly advice.
Thank you again
They might be. But they might not be for your own drivers after so much time has elapsed since Coral went belly up. And I'm loath to try to fudge something (& it would be a fudge anyway as the specs are incomplete) for these, you build it, and then find it didn't work because your own units either spec. differently, or have aged differently & so on & so forth. That's why I've never done a box for Corals, decent units though I gather they were.
Hi All,
Thank s for the advice & links.
Hi GM,
Is it ok if I e-mail you for some advice
with regards to Folded ML TQWT design ?
Thanks
Thank s for the advice & links.
Hi GM,
Is it ok if I e-mail you for some advice
with regards to Folded ML TQWT design ?
Thanks
Hi GM,
Thank you. Because I've got some idea about
the speaker that I want to build but will only
post it if I suceed.
Many thanks again
Thank you. Because I've got some idea about
the speaker that I want to build but will only
post it if I suceed.
Many thanks again
Greets!
You're welcome!
To me, this sounds like you want free help with a potential commercial design which folks around here get ripped off enough already, so pardon my lack of interest if true. Regardless, sorry, but for a variety of reasons I'm forced to severely scale back my off-line one-on-one help to just existing friends.
Good luck with the project!
GM
You're welcome!
To me, this sounds like you want free help with a potential commercial design which folks around here get ripped off enough already, so pardon my lack of interest if true. Regardless, sorry, but for a variety of reasons I'm forced to severely scale back my off-line one-on-one help to just existing friends.
Good luck with the project!
GM
Hi Gm,
So sorry to misguide you. Yes indeed I need guidance
because of my lag of knowledge to speaker building.
I'm in project management & audio is just a hobby.
You seem like an open minded person & I thought
it would be nice if someone could listen to my thoughts
& advice me on the do's & don'ts & most importantly
without being criticize or laugh at.
Thank you again
So sorry to misguide you. Yes indeed I need guidance
because of my lag of knowledge to speaker building.
I'm in project management & audio is just a hobby.
You seem like an open minded person & I thought
it would be nice if someone could listen to my thoughts
& advice me on the do's & don'ts & most importantly
without being criticize or laugh at.
Thank you again
So ask here. Why do you assume people will laugh at you? You've just got a bunch of advice & links, and now you assume you'll be attacked? 
😕
😕Hi Scott,
Thanks for the reply. How to ask ? As you said in post #4.
the specs I have may or maybe not be accurate.
From GM's post, it seems that he's got experience
with the corals & that's why I'm seeking for his advice
& guidance. O.K to spill the beans, I'm looking to build
an Omni fullrange speaker. Which means that the driver
would have to be mounted on top of the cabinet. After
studying the your BVR's & Folded TQWT enclosures, they
all seem to be very tall & I'm looking at how to achieve
a decent bass output without having to build a tall enclosure.
Maybe a TL with more foldings will do the job but had listen to
some PMC speakers before & they sounded slow in the bass.
Thanks for the reply. How to ask ? As you said in post #4.
the specs I have may or maybe not be accurate.
From GM's post, it seems that he's got experience
with the corals & that's why I'm seeking for his advice
& guidance. O.K to spill the beans, I'm looking to build
an Omni fullrange speaker. Which means that the driver
would have to be mounted on top of the cabinet. After
studying the your BVR's & Folded TQWT enclosures, they
all seem to be very tall & I'm looking at how to achieve
a decent bass output without having to build a tall enclosure.
Maybe a TL with more foldings will do the job but had listen to
some PMC speakers before & they sounded slow in the bass.
- Status
- Not open for further replies.