I took a photo of ShuGang's 211 and 805A which were manufactured recently.
The photo is located at below URL.
http://userdisk.webry.biglobe.ne.jp/013/400/99/N000/000/000/129022284759516122098_211vs805A.jpg
I understood the difference between 805A (Mu=50) and 211 (Mu=12.5)
comes from the dimensions of Grid-Filament, Grid-Plate and Grid winding pitch.
The photo is located at below URL.
http://userdisk.webry.biglobe.ne.jp/013/400/99/N000/000/000/129022284759516122098_211vs805A.jpg
I understood the difference between 805A (Mu=50) and 211 (Mu=12.5)
comes from the dimensions of Grid-Filament, Grid-Plate and Grid winding pitch.
Is there a question here?
The main difference between the two tubes is the grid pitch (211 grid wires are almost twice as far apart per turn than the 805 grid wires) and the spacing between the grid and plate. the plate of the 211 is very close to its grid whereas the plate of the 805 is spaced considerably further from its grid.
Daniel
The main difference between the two tubes is the grid pitch (211 grid wires are almost twice as far apart per turn than the 805 grid wires) and the spacing between the grid and plate. the plate of the 211 is very close to its grid whereas the plate of the 805 is spaced considerably further from its grid.
Daniel
- Status
- This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.