Connectors for these terminals on filter?

[amundsen]

Hello,


I have a B&C Speakers crossover filter.


One can see these terminals.





What kind of connector should I use with them? This one?

Thank you!

 

[MikePP]

Yeah , they're generically called faston's


To be accurate there are several types/sizes for both female and males, not only to match the width but to match the thickness of the male tab (that is shown in the 1st pic)

They look like the 6.3mm wide variety

 

[amundsen]

Thank you @MikePP!

 

[Vovk Z]

Yes, we call them Faston too. It looks like 6.3 mm one but can be 4.8 mm too.

 

[MikePP]

But also don't forget the thickness spec (and of course current rating)

 

[MAAC0]

There are also narrower Faston used on car speakers too

 

[rayma]

But also don't forget the thickness spec (and of course current rating)

Yes, try to use the same brand if at all possible, for a proper fit.

 

[JMFahey]

Suggest you measure them with a caliper before ordering, a ruler is not enough.

 

[rayma]

Yes, ii doesn't take much of a discrepancy to cause poor contact.

 

[amundsen]

B&C speakers has confirmed to me these terminals are 6.3/0.8.

 

[MikePP]

Cool