Going to be building a set of smt 212's to try out. Im using the b&c 12pe32 drivers in the cabinet but im still struggling to find a compression driver that will match well. And size? 1", 1.4", or 2"
Anyone have any reccomendations?
Anyone have any reccomendations?
try this over at the multi-way forum.
looking at the horn mass corner, I'd say look to cross 1,200hz.
Maybe a 1.4" in a horn roughly a foot wide...…………………..
looking at the horn mass corner, I'd say look to cross 1,200hz.
Maybe a 1.4" in a horn roughly a foot wide...…………………..