Mr. Pass.... i saw this message just now....Then you should do it in style - email me and I will send you a set of the Harris IRF parts.
I am beyond words.... and i am honored.....
Could You please let me know how to email You?
Thank You
Zen my friend 🙏🙏👍 ... please take into account i was not active for 10+ years.... returned to the forum and this world again after gifting my soldering iron and giving up on my system completely ... i was not even listening to music for almost 10 years....
I am not proud on any of that - dark ages for me....
....
I am thankfull there are guys here that are willing to help even answering my stupid questions... and you are one of them also... so thank you....
...
Will send an email - thank you
there is no need for any apologizing
just lighten up, Sparkle
( I was just stating one of facts, someone spread Papa's email addy even to Sparrows....... just one of reasons that I'm under permanent Papa's disgrace )
There are no stupid questions. Remember, it’s a journey and a ride. Come on in…the water is warm!
Best,
Anand.
I build IcePower 500w mono-blocks to see what the Class-D fuss was about.
It's not so bad, in fact, it's a bit of alright.
Been using them with the H2 preamp in front.
I like having the Class-D monos in my toolbox.
It's not so bad, in fact, it's a bit of alright.
Been using them with the H2 preamp in front.
I like having the Class-D monos in my toolbox.
Class d is most accurate at lower power as the carrier frequency duty cycle is 50%.
A good D amp should beat a class A amp.
The problem is hash noise interference on low level analog signals and FM signals. This noise can lower the S/N to 60 dB.
A good D amp should beat a class A amp.
The problem is hash noise interference on low level analog signals and FM signals. This noise can lower the S/N to 60 dB.
The Ncore NC400, UCD400HG Hxr, UCD180LP, Pass F5 (SMPS), the Krell KSA-50 Clone, the Quicksilver 8417 clones, Icepower 500ASP monos, ESP P101, Tripath TA-0103 based, and Innersound ESL amp.
All fantastic sounding amps. As far as the ones I listen to MOST on my Quad ESL-988?
P101
NC400
Krell
F5
All fantastic sounding amps. As far as the ones I listen to MOST on my Quad ESL-988?
P101
NC400
Krell
F5
🙏🙏👍
👌👍
Nc400 was on my radar for class D.... yes....
Thank you for your kind input....
I finished a M2 two years ago (following ZM advice) and very happy with it. I borrowed and tryed it with several speakers: Sonus Faber, big Tannoys, Unison Research, Fostexes, Markaudios. Always sounded nice (many friends surprised) with enough power.
Last time we tested it vs a Roksan integrated, speakers were SF Guarneri Homage at very high sound level. Owner preferred the M2.
Looks like M2 always sounds right 🙂
Last time we tested it vs a Roksan integrated, speakers were SF Guarneri Homage at very high sound level. Owner preferred the M2.
Looks like M2 always sounds right 🙂
M2 is FW Swiss Knife
that being about function
as concept, Sheer Demonstration of Papa's Kung Fu
that being about function
as concept, Sheer Demonstration of Papa's Kung Fu
Class D has come a long way. Very acceptable sound for the masses. Still Class A is king when it comes to sound. That is a good Class A amplifier whether tube or SS. This is from someone who has many class D and many class A and A/B to compare them with. With my ears that is.
It is pretty obvious looking at the price of Nelson Pass amplifiers that they are intended for those seeking the best sound not average decent sound. One of his amplifiers are a long term investment as well and not a throw away amplifier after a few years. They hold their value for a reason. Figure it out for yourself why.