I'm looking for a very simple DSP crossover. I have found trigaudio and I am negotiating with them. They normally sell in MOQ 300, and I need maximum 20 (for reselling in my small DIY shop).
Are there any other alternatives. I'm not looking for a MiniDSP competitor, but just a very basic board.
Are there any other alternatives. I'm not looking for a MiniDSP competitor, but just a very basic board.
best option is a board with ADAU1701. depending on other options like power-on click supppression, wide range supply input regulation, connectors, monitoring , volume control, cost will go up. cost of real time parameter change is 80$, or off line programming using an arduino. checkout freedsp board...
ADAU1701 is MiniDSP territory, and no one can beat them in either cost or quality or support. I am looking for ultra simpel board 2 in 4 out. Eq on input and cross over on output. Pricerange = half of miniDSP.
if the board is SMT only the cost will be tolerable. TH connectors and other TH components drive up the manufacturing costs. unless the DIY-er solders the TH components as a kit.
It's very hard to find. Maybe there is no market for DSP in the 50$ range incl software. Is the price up to MiniDSP 2 in 4 out wtih plug in not worth mentioning?
the cost problem is in the software. Analog devices does not allow the sale of their products and freeware software and have the end-user reprogram the DSP. That's why minidsp had to develop their own software . I estimate the board material cost below $30 in quantities. you have to sell a lot of units to earn back the software development.
so fixed XO freqs, and corrections ?
then you can save on the programming connector and just plug in a programmed eeprom. and do the development on an evalkit or any board like the freedsp board. what power supply do you think of ?
then you can save on the programming connector and just plug in a programmed eeprom. and do the development on an evalkit or any board like the freedsp board. what power supply do you think of ?
Again, I am not going to making anything - no programming no soldering, just a off the shelf solution.
I could help you developing a product, but it's not clear to me what the specs should be..
check out the nanodsp thread i did
check out the nanodsp thread i did
No thanks, I'm just after a well proven cheap board. They are out there, I just have to find them.
right now I'm asking some questions about this board
FREE SHIPPING DSP, processing module, car amplifier processor, modified car amplifier processor, effects processing-in Other Electronic Components from Electronic Components & Supplies on Aliexpress.com | Alibaba Group
I can't see if the RS232 interface is part of the board or not.
FREE SHIPPING DSP, processing module, car amplifier processor, modified car amplifier processor, effects processing-in Other Electronic Components from Electronic Components & Supplies on Aliexpress.com | Alibaba Group
I can't see if the RS232 interface is part of the board or not.
interesting find ! seems to be developed by:
DA3024B|¹ãÖݾ§ÈñÐÅÏ¢¼¼ÊõÓÐÏÞ¹«Ë¾
my guess is that's a 1701 plus a micro. I see 2 crystals
could not see any control SW download at kingray, but my chinese is a bit rusty ... or non-existent
DA3024B|¹ãÖݾ§ÈñÐÅÏ¢¼¼ÊõÓÐÏÞ¹«Ë¾
my guess is that's a 1701 plus a micro. I see 2 crystals
could not see any control SW download at kingray, but my chinese is a bit rusty ... or non-existent
Great, Thanks for that. They also have a 6 in 6 out cross over DA3066
Google translate
USB port on the remote control or RS232 real-time control, with PC control software, beautiful interface, easy to adjust.
I just can't see the ports/pins on the PCB.
Google translate
USB port on the remote control or RS232 real-time control, with PC control software, beautiful interface, easy to adjust.
I just can't see the ports/pins on the PCB.
the DA3066 seems to have an ADAU1461 as the Mclk is driven at pin 2 from the 12.288 oscillator. the rsr232 is on uart level RXD/TXD, so need a USB to rs232 RXDTXD converter, a few bucks on aliexpress. also these guys circumvent the EULA agreement by having theyr own SW control the dsp instead of using the sigmastudio.
have seen it, but also negative feedback and cost much more than the other board.
"No description of this module. No pin configuration. No software."
"No description of this module. No pin configuration. No software."
$18 DSP module + $12 programming dongle:
2, 4, or 6 Channel In and Out DSP Module for integration into amplifiers » UBUY Industrial Inc
These UBUY modules have AKM ADC on board with better SNR.
2, 4, or 6 Channel In and Out DSP Module for integration into amplifiers » UBUY Industrial Inc
These UBUY modules have AKM ADC on board with better SNR.
Last edited:
Have seen those. But MOQ is 300, and it seems the dsp is sold with amplifiers but I am not sure. I will try to inquire
Then how about XMOS Startkit + Audio Slice:
XK-STK-A8DEV XMOS | 880-1066-ND | DigiKey
XA-SK-AUDIO XMOS | 880-1043-ND | DigiKey
There is no software ready software available yet, just XMOS example code and free development tools.
XK-STK-A8DEV XMOS | 880-1066-ND | DigiKey
XA-SK-AUDIO XMOS | 880-1043-ND | DigiKey
There is no software ready software available yet, just XMOS example code and free development tools.