Starting with 12 June 2022 , the flexible colorated support are available for special PCB's boards , according details from below photo.
Small boards ( max 30 x 30 mm ) can be panelized ) if have the frames as in bellow photo) , but the price / small board can not be less than 1 Euro / board.
The presented boards from panel have 20x15 mm ) . Panel boards must be all the same model.
The presented boards from panel have 20x15 mm ) . Panel boards must be all the same model.
Cheapest-printed-circuit-boards , single / double layer, on FR1 , FR2 , FR4 , CEM1 , CEM3
and Special Support laminates (flexible) as :
and Special Support laminates (flexible) as :
- CG-10 ; 0,1mm support thichness , blue
- CG-10 ; 0,2mm support thichness , black
- FR4 ; 0,2mm support thichness , translucent
Cheapest-printed-circuit-boards , single / double layer, on FR1 , FR2 , FR4 , CEM1 , CEM3
and Special Support laminates (flexible) as :
and Special Support laminates (flexible) as :
- CG-10 ; 0,1mm support thichness , blue
- CG-10 ; 0,2mm support thichness , black
- FR4 ; 0,2mm support thichness , translucent
Cheapest-printed-circuit-boards , single / double layer, on FR1 , FR2 , FR4 , CEM1 , CEM3
and Special Support laminates (flexible) as :
and Special Support laminates (flexible) as :
- CG-10 ; 0,1mm support thichness , blue
- CG-10 ; 0,2mm support thichness , black
- FR4 ; 0,2mm support thichness , translucent
Cheapest-printed-circuit-boards , single / double layer, on FR1 , FR2 , FR4 , CEM1 , CEM3
and Special Support laminates (flexible) as :
and Special Support laminates (flexible) as :
- CG-10 ; 0,1mm support thichness , blue
- CG-10 ; 0,2mm support thichness , black
- FR4 ; 0,2mm support thichness , translucent
The printed circuit boards can be paid to my Euro IBAN (bank account) through TransferGo services for smallest possible fees.
In this way, the pcb's with cost over 60 Euro , have free shipping cost
In this way, the pcb's with cost over 60 Euro , have free shipping cost
The colored flexible PCB can not be sell as " raw material".
The manufactured pcb's on this special laminate must be according sizes from below picture.
The manufactured pcb's on this special laminate must be according sizes from below picture.
Cheapest printed circuit boards ( pcb's)
Bellow boards are manufactured on CEM1 - 1 mm thickness - WHITE , 35 um copper
Bellow boards are manufactured on CEM1 - 1 mm thickness - WHITE , 35 um copper
Cheapest printed circuit boards ( pcb's)
Bellow boards are manufactured on CEM3 - 1,5 mm thickness - Yellow , 35 um copper , SILVERED
Bellow boards are manufactured on CEM3 - 1,5 mm thickness - Yellow , 35 um copper , SILVERED
Cheapest printed circuit boards ( pcb's)
Bellow boards are manufactured on CEM3 - 1,5 mm thickness - Yellow , 35 um copper , SILVERED
Bellow boards are manufactured on CEM3 - 1,5 mm thickness - Yellow , 35 um copper , SILVERED
PCB's manufacturing from various electronics magazines from Europe and beyond, may be possible in the following situations:
1) maximum quantity / requester (1 piece or 1 set - if the project has several PCBs)
2) the applicant sends the page where the pcb to be made can be found.
3) the achievement will be possible if you meet the minimum quality conditions of the image in order to extract and achieve it.
1) maximum quantity / requester (1 piece or 1 set - if the project has several PCBs)
2) the applicant sends the page where the pcb to be made can be found.
3) the achievement will be possible if you meet the minimum quality conditions of the image in order to extract and achieve it.
Cheapest printed circuit boards, on CEM3 ( tinned /silvered)
Shipping cost = FREE* by National Post Mail Services with tracking number and Arrival Confirmation Receipt.
* till 30 October 2023 , otherwise 5 Euro / package with max. 100 grames.
I will ship only in EU countries ( Customs procedures are not applied)
Shipping cost = FREE* by National Post Mail Services with tracking number and Arrival Confirmation Receipt.
* till 30 October 2023 , otherwise 5 Euro / package with max. 100 grames.
I will ship only in EU countries ( Customs procedures are not applied)
Starting January 1, 2024, the home -made manufacturing of printed circuits for custom LED strips (custom supply voltages), for solar lighting systems, it is available.
Technical data :
The cost of PCB's for 5730, 7020 LED's, with the size of 300 x 50 mm, FR4 (0.5 mm), can be between 15- 30 Euro / pcb (shipping via the Romanian Post with tracking number and arrival confirmation receipt = 5-10 Euro in EU countries only , for packages less than 100 g)
For CEM1 support, 1 mm (support color = white), the cost is 50% higher.
Could be manufactured, max. 5 pcs/applicant, in 30-45 days from the date of receipt of the amount
Technical data :
- FR4 support, 0.5 mm (for 5730, 7020 LED's, or other types with max power / led = 1 W)
- Maximum length: 300 mm
- maximum width: 50 mm
The cost of PCB's for 5730, 7020 LED's, with the size of 300 x 50 mm, FR4 (0.5 mm), can be between 15- 30 Euro / pcb (shipping via the Romanian Post with tracking number and arrival confirmation receipt = 5-10 Euro in EU countries only , for packages less than 100 g)
For CEM1 support, 1 mm (support color = white), the cost is 50% higher.
Could be manufactured, max. 5 pcs/applicant, in 30-45 days from the date of receipt of the amount