Presented starting price of pcb's (0,0375 Euro/cm2), is based on 16 um copper thickness.
For 35 um copper, the price is higher than double.
The support for 35 um is available on :
FR1 ( 1,5mm-yellow) - single layer
FR2 ( 1,5mm-yellow) - single layer
CEM1-white (1mm) - single layer
For 35 um copper, the price is higher than double.
The support for 35 um is available on :
FR1 ( 1,5mm-yellow) - single layer
FR2 ( 1,5mm-yellow) - single layer
CEM1-white (1mm) - single layer
Cheapest printed circuit boards - SILVERED, on CEM3 support.
An externally hosted image should be here but it was not working when we last tested it.
Cheapest-PRINTED-CIRCUIT-BOARDS- SILVERED
An externally hosted image should be here but it was not working when we last tested it.
Below can be seen the FREE SILKSCREEN of the boards shown in the post #344
An externally hosted image should be here but it was not working when we last tested it.
FR1, light yellow, 1 mm, single layer, 35 um copper, starting with 4 Euro / dm2.
Available until 30 September 2016.
Available until 30 September 2016.
FR2, light yellow-brown (similar with FR1), 1,5 mm, single layer, 35 um copper, starting with 4,5 Euro / dm2.
Manufacturing and delivery (in European countries): in minimum 6 days, after the money are received, by Western Union only.
Delivery time is valid for SINGLE LAYER boards with maximum size 140x90mm.
Delivery time is valid for SINGLE LAYER boards with maximum size 140x90mm.
All inquiries regarding pcb's manufacturing must be sent to: msdesignerpro@gmail.com
I answer you ONLY to private e-mail address ( NOT as private message on diyaudio.com forum)
Thanks for yours understanding,
Mihai
I answer you ONLY to private e-mail address ( NOT as private message on diyaudio.com forum)
Thanks for yours understanding,
Mihai
Cheapest SILVERED printed circuit boards on CEM3 support.
SILVER immersion it's FREE for boards with less than 70 cm2 and WITHOUT ground plan (" RASTNET")
SILVER immersion it's FREE for boards with less than 70 cm2 and WITHOUT ground plan (" RASTNET")
An externally hosted image should be here but it was not working when we last tested it.
From 01 October 2016 will be available the ALUMINIUM support for pcb's manufacturing.
( only single layer will be available)
( only single layer will be available)
Shipping : in max. 15 days after the required amount it's received ( only by Western Union in Euro)
GERBER files are not useful for pcb manufacturing.
The best results are from Eagle files ( .brd) for single / double layer.
For single layer only, it's OK! the ExpressPCB files, too.
The best results are from Eagle files ( .brd) for single / double layer.
For single layer only, it's OK! the ExpressPCB files, too.
1 board 100x100 mm ( max. size) , single layer , FR4 , 0,5 mm support thickness , 18 um copper ,shipping cost included in Europe only , it cost 30 Euro
It is included too : drilling + TINNING ( for boards with max. 50% ground plane)
Payment : Western Union in Euro. (The money transfer fees are paid as additional amount to 30 Euro , and it's paid by buyer)
Delivery : through National post mail services with ARRIVAL CONFIRMATION RECEIPT, in max. 15 days after money transfer.
It is included too : drilling + TINNING ( for boards with max. 50% ground plane)
Payment : Western Union in Euro. (The money transfer fees are paid as additional amount to 30 Euro , and it's paid by buyer)
Delivery : through National post mail services with ARRIVAL CONFIRMATION RECEIPT, in max. 15 days after money transfer.
Last edited:
Cheapest SILVERED pcb's on FR4 support
An externally hosted image should be here but it was not working when we last tested it.
Shipping: ONLY in European countries, by national post mail services with ARRIVAL CONFIRMATION RECEIPT ( cheapest shipping way)
Even we are talking about a small board 50x50 mm single layer , on FR4 with 0,5 mm thickness, the total cost with shipping included can not be less than 30 Euro.