audio-kraut said:
Hi kraut ,
The VFD is the same as this one(http://eshop.diyclub.biz/product_info.php?products_id=436),it is a good VFD form japan.Sorry,but is not the pirating.Just the VFD is used the same.
Best Regards
Huang
Here is the picture
Attachments
Hi,
How much to ship kit to Malaysia.
Other than paypal, what other methods of payments do you accept?
Thanks!
How much to ship kit to Malaysia.
Other than paypal, what other methods of payments do you accept?
Thanks!
jazzy939 said:
Hi jazzy939
Sorry! I just have the paypal and the alipay(www.alipay.com).
Total cost is 38USD including airmail registered and paypal fee.
It just take 7-10 dyas from Hongkong.
Thanks,
Regards,
Huang
Thanks, duly noted!
FYI I have never purchase anything using paypal.
So, how do I go about paying you by paypal? I can get someone to pay on my behalf. I hope this is not too much trouble.
Sorry guys for a slight deviation..
Thanks a mil.
FYI I have never purchase anything using paypal.
So, how do I go about paying you by paypal? I can get someone to pay on my behalf. I hope this is not too much trouble.
Sorry guys for a slight deviation..
Thanks a mil.
jazzy939 said:
Hi Jazzy
Sorry to reply you late.Paypal is easy to use.Of couse you can ask someone to pay for you,After you pay the kit,you need to mail to me and tell me your adress and your cellphone number,And i will send the kit to you as soon as i can!
Thanks,Huang
Hey Slowgay,
Is this for remaking a CDROM to a standalone CD-player? Or is it just to get a remote for your CDROM when it is in your PC?
Is this for remaking a CDROM to a standalone CD-player? Or is it just to get a remote for your CDROM when it is in your PC?
slowgay,
Thank you for the reply.
This is what I am going to do, correct me if I am wrong.
1. I will make PayPal payment USD38 to your PayPal account hsslow@msn.com
2. Then I will provide you my postal address and my phone(mobile) number and wait around 10 days for it to arrive.
Thats about it, right?
😀
Thank you for the reply.
This is what I am going to do, correct me if I am wrong.
1. I will make PayPal payment USD38 to your PayPal account hsslow@msn.com
2. Then I will provide you my postal address and my phone(mobile) number and wait around 10 days for it to arrive.
Thats about it, right?
😀
revintage said:
Hi Lars,
This controller remaking a IDE CDROM to a standalone CD-player without PC.And you need to have the power 5V & 12V for the CDROM and the controller~
Thanks,Huang
Received the kit
Hi,
Received the kit today. Thanks.
Some observations:
- Quality is good, except some leftover flux that does not affect performance. VFD display is excellent
- Only worked after trying the third CD/DVD ROM. First was a Samsung DVD, second, a BTC cd burner (2004). The third one was a Hitachi DVD made in 1999 and that worked. When it does not work, the processor boots up, display the revision number and gets stuck in "checking for IDE"
- It is very fast switching from one song to another
- All keys in remote work, except the one with the "radiation" symbol
- Functions (in addition to basic): open/close tray; fast forward/rewind, 1X, 2X, 3X and 4X if you keep the key pressed; Select a track with number keys; display track play time, track remaining time, CD play time and CD remaining time; repeat track, repeat cd.
Question:
There is an extra set of pins/jumpers in the back named "J4" what is this for?
Hi,
Received the kit today. Thanks.
Some observations:
- Quality is good, except some leftover flux that does not affect performance. VFD display is excellent
- Only worked after trying the third CD/DVD ROM. First was a Samsung DVD, second, a BTC cd burner (2004). The third one was a Hitachi DVD made in 1999 and that worked. When it does not work, the processor boots up, display the revision number and gets stuck in "checking for IDE"
- It is very fast switching from one song to another
- All keys in remote work, except the one with the "radiation" symbol
- Functions (in addition to basic): open/close tray; fast forward/rewind, 1X, 2X, 3X and 4X if you keep the key pressed; Select a track with number keys; display track play time, track remaining time, CD play time and CD remaining time; repeat track, repeat cd.
Question:
There is an extra set of pins/jumpers in the back named "J4" what is this for?
Pictures:
An externally hosted image should be here but it was not working when we last tested it.
An externally hosted image should be here but it was not working when we last tested it.
Re: Received the kit
Hi xaudiox,
Great to here that you have received the kits~Wish you happy playing with it~Thanks~
Hi glt
Great to here that you have received the kit~
Sorry for untell you about the "J4".
The "J4" is ten pin ISP for download and burn the fireware on the controller~
Here is the picture STK200 for download&update the fireware~
xaudiox said:
glt said:
Hi xaudiox,
Great to here that you have received the kits~Wish you happy playing with it~Thanks~
Hi glt
Great to here that you have received the kit~
Sorry for untell you about the "J4".
The "J4" is ten pin ISP for download and burn the fireware on the controller~
Here is the picture STK200 for download&update the fireware~
fredlock said:
Hi Fredlock,
Yes,have some,but not many~I'm glad you are interested in it~
Thanks,Huang
Re: Received the kit
I tested the CD/DVD ROMS and found that you have to set the jumper to master and they will be recognized by the controller. If it is set to Slave or cable select, it will be stuck in the "checking IDE" mode
Next, I'm going to test the digital out with toshlink
glt said:
I tested the CD/DVD ROMS and found that you have to set the jumper to master and they will be recognized by the controller. If it is set to Slave or cable select, it will be stuck in the "checking IDE" mode
Next, I'm going to test the digital out with toshlink
- Status
- Not open for further replies.