I'm selling my CDPro project which I never had time and energy to finish.
The project is based on Bergrans CD transport (CD-Pro2M/LF CD player | Bergrans Electronics)
I have made my own boards for this and I'm using super high quality linear power supplies only (very much overkill for the transport I believe). Also the regulators are over the top lt3045 with huge Nichigon filter banks and Talema encapsulated transformers as you can see in photos. Of course the power supplies can be used for any other project as well.
The CDPro unit I have bought years ago as a working unit but never found a proper connectors so haven't tested the CDPro unit itself. I got the project up and running but never connected to the CDPro unit because of the connector I could not find. The software is customized by having a custom Flash screen, otherwise original.
I can provide the schematics, Eagle files and Gerbers and PIC files for the buyer.
The project includes also some mechanical parts + motors, belts, slide bearings, etc. for the top loading door mechanism.
What you need to add is the enclosure and some connectors, buttons and perhaps some small parts...
Included is a very nice OLED screen. (note, the schematic is for LCD but OLED can be used by some minor wiring changes seen on the photo)
How about 250€ for the whole lot + shipping. Can be shipped anywhere
More photos here:
CDPro - Google Drive
I should have a video showing the action, will try to find it..
The project is based on Bergrans CD transport (CD-Pro2M/LF CD player | Bergrans Electronics)
I have made my own boards for this and I'm using super high quality linear power supplies only (very much overkill for the transport I believe). Also the regulators are over the top lt3045 with huge Nichigon filter banks and Talema encapsulated transformers as you can see in photos. Of course the power supplies can be used for any other project as well.
The CDPro unit I have bought years ago as a working unit but never found a proper connectors so haven't tested the CDPro unit itself. I got the project up and running but never connected to the CDPro unit because of the connector I could not find. The software is customized by having a custom Flash screen, otherwise original.
I can provide the schematics, Eagle files and Gerbers and PIC files for the buyer.
The project includes also some mechanical parts + motors, belts, slide bearings, etc. for the top loading door mechanism.
What you need to add is the enclosure and some connectors, buttons and perhaps some small parts...
Included is a very nice OLED screen. (note, the schematic is for LCD but OLED can be used by some minor wiring changes seen on the photo)
How about 250€ for the whole lot + shipping. Can be shipped anywhere
More photos here:
CDPro - Google Drive
I should have a video showing the action, will try to find it..
Attachments
Last edited: