I must replace laser head´s i my Studer cd players , which have CDM4 pro (or 4/36) cd mehnanisms.
I can´t find the whole orginal mech , so i will buy some diferent version of CDM4 and just change the laser head unit with swing arm.
So my question is, are the laser units of CDM4/11 , 4/19 and 4/25 the same like one in CDM 4/36?
Visually they are but maybe some other diffrences are involved.
Thank´s for your help.
And yust one question for all of you here. Did someone buy some CDM-3 cd mehnanism from man who sell them here on Diyaudio , are they new? I am yust carefull becouse they are not cheap , I need one piece for old Studer A730.
I can´t find the whole orginal mech , so i will buy some diferent version of CDM4 and just change the laser head unit with swing arm.
So my question is, are the laser units of CDM4/11 , 4/19 and 4/25 the same like one in CDM 4/36?
Visually they are but maybe some other diffrences are involved.
Thank´s for your help.
And yust one question for all of you here. Did someone buy some CDM-3 cd mehnanism from man who sell them here on Diyaudio , are they new? I am yust carefull becouse they are not cheap , I need one piece for old Studer A730.
I replaced a 4/36 with a 4/19 head (marantz cd10). That worked and fixed the problem 😀 Maybe the lenses are different (glass/plastic). Finding a cheap 4/19 player should be easy (at least here) to try it out.
As for the cdm3, i'm in the oposit corner: have a cdm3 (nos, not bought via diya) and looking for a player..🙂 (sorry, not selling)
As for the cdm3, i'm in the oposit corner: have a cdm3 (nos, not bought via diya) and looking for a player..🙂 (sorry, not selling)
Guido thank you for reply.
I am have player but I am looking for CDM3.
I have Studer A730 but I am not selling it , sorry.
Happy new year
I am have player but I am looking for CDM3.
I have Studer A730 but I am not selling it , sorry.
Happy new year
Moin,
ask the boy´s here:
http://www.ersatzteil.justone-schnepel.de/html/bildergallerie1.html
Carsten
ask the boy´s here:
http://www.ersatzteil.justone-schnepel.de/html/bildergallerie1.html
Carsten
Guido , you will probably find cd player with broken CDM3 before i will find new mechanism.
I am pretty mad couse Philips did not continue to produce CDM 1-9. They were the best mech. ever produced by any brand , exept Teac (VRDS).
I have five players at home and all of them use pro versions of Philips "swing arm" transports.
Rotel RCD990 - CDM9pro
Studer D731- CDM4pro (three)
Studer A730 - CDM3
I am pretty mad couse Philips did not continue to produce CDM 1-9. They were the best mech. ever produced by any brand , exept Teac (VRDS).
I have five players at home and all of them use pro versions of Philips "swing arm" transports.
Rotel RCD990 - CDM9pro
Studer D731- CDM4pro (three)
Studer A730 - CDM3
Hi, I need the plastic tray of Studer D730 because mine is broken, can anyone help me to find the spare part for mine? Thanks.
I attach some picture for more details:
I attach some picture for more details:
An externally hosted image should be here but it was not working when we last tested it.
An externally hosted image should be here but it was not working when we last tested it.
Today I have replace successful the laser unit from CDM-4/25 (Micromega SOLO). I get the replacement from an used CDM-4/11. Only a small mechanical difference I note in the spring plate fastening (spring plate for the bearing ball):
The openings near the screw holes were rectangular instead of round.
Another difference was the foil- (flex-)cable (connection to the laser unit) glued to the carrier plate of CDM-4/19, which was very difficult to detach without damaging one of the connections.
But what about replacing of this laser unit against a professional version (laser unit from CDM-4/36, CDM-4/53, CDM-1/MKII or CDM-4/IND resp. CDM-4 INDUSTRIAL) ??
check out
https://www.ebay.de/sch/acoustic-pa...5244195872&rt=nc&_trksid=p2047675.m3561.l2562
and
https://www.hifi-advice.com/blog/cl...m-4-cdm-1-mkii-cdm-9/?related_post_from=26597
Last edited:
