Does the stock radio have 4 holes near the corners?
I once used a couple pieces of wire coat-hanger,fashioned into a U shape,with the ends bent at a 90-deg. angle,about 1/4 inch up from the ends.
Push into the holes,and "flip" them out towards you,this will press in the little tabs/clips on the sides of the radio,and release it.
I once used a couple pieces of wire coat-hanger,fashioned into a U shape,with the ends bent at a 90-deg. angle,about 1/4 inch up from the ends.
Push into the holes,and "flip" them out towards you,this will press in the little tabs/clips on the sides of the radio,and release it.
- Status
- This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.