Capacitor/Choke value in SET buffer supply? (95 vdc B+)

[Gizmo2]

Hi,

Building a 12AU7 cathode follower line buffer after a stock 2 volt cd player.

Want to run a simple C-L-C using (2) Solen 47uF PPE caps.

Told to buy a Hammond 5H choke.

My power supply is 125v-125v, 12.6v 300mA heaters.


There are so many different values of 5H chokes

http://www.tubesandmore.com/scripts/...RC&PAGE=SUBCAT

Want to end up with 95-100 vdc B+

What choke should I buy?


Any comments on 12AU7 would be appreciated. I purchased the Decware EM0705 125v-125v, 12.6v 300mA supply. If this supply can run a couple of 5687"s or a single 6922 or 6N1P I would be very interested in trying other routes besides the ECC82.

ZKIT5 power supply kit

 

[kmtang]

Use double PI LCLC filter with choke input. That means there is no capacitor between the rectifier and the first choke.


Johnny

 

[rotaspec]

The 6N1P is 6.3v 600mA heated, so your supply won't work with that tube.