Hi,
i am designing a 5.1 hometheater system.i have designed my amplifiers and i am using lm3886 parellel with dc servo for my sub.
My knowledge in designing enclosure for sub is very less....so please help me attain the best performance
i am designing a 5.1 hometheater system.i have designed my amplifiers and i am using lm3886 parellel with dc servo for my sub.
My knowledge in designing enclosure for sub is very less....so please help me attain the best performance
Hi vishnupg,
You are providing no help as to your application, enclosure size, room size, placement, etc.
Anyway, to get things started: Hornresp is a free design software that you might find helpfull:
Hornresp
After downloading and installing, please, read through the help file, it is quite informative.
The speaker you are referencing does not look like much of a subwoofer, and I would recommend you measure the T/S parameters yourself (in addition to what you have in the specification sheet) before you spend a lot of time on designing, or cutting wood:
Measuring Loudspeaker Driver Parameters
Regards,
You are providing no help as to your application, enclosure size, room size, placement, etc.
Anyway, to get things started: Hornresp is a free design software that you might find helpfull:
Hornresp
After downloading and installing, please, read through the help file, it is quite informative.
The speaker you are referencing does not look like much of a subwoofer, and I would recommend you measure the T/S parameters yourself (in addition to what you have in the specification sheet) before you spend a lot of time on designing, or cutting wood:
Measuring Loudspeaker Driver Parameters
Regards,
Attachments
![Iwai 8' subwoofer 4 ohm [measured].gif](/community/data/attachments/256/256978-0264e022907fa6bcc2d19074e05ec19a.jpg?hash=AmTgIpB_pr)
Hi GM,
Good news!
I plugged your numbers into my previously submitted simulation and found the measured T/S to be slightly improving the suggestion despite the new driver Sd is larger than the advertised..
The driver would still fit the enclosure with CSA= 224cm^2 as long as the internal width is close to 21 cm.
b🙂
Attachments
Who knows the price but you? 🙄 You're the one who suggested a driver from India. Mail the driver manufactures and post to this thread.
b🙂
Thank you Inductor.
If this price is correct : ₨ 1100 = $ 19.9492 US Dollar then this driver is IMO a real bargain..
b🙂
There is your problem! 😀
https://fbcdn-sphotos-e-a.akamaihd.net/hphotos-ak-ash3/533225_10150981985541198_811322240_n.jpg
https://fbcdn-sphotos-e-a.akamaihd.net/hphotos-ak-ash3/533225_10150981985541198_811322240_n.jpg
- Status
- Not open for further replies.