Can I test the input board by itself of a Stasis 3?
Or does the constant current section blow itself up without a power section to feed?
I'm bringing up by rails to +/- 20 and using a 150w lamp in series with the line cord.
Or does the constant current section blow itself up without a power section to feed?
I'm bringing up by rails to +/- 20 and using a 150w lamp in series with the line cord.
I know where the cascode connection is. I know where bias is set. Is the local feedback block the four heat-sinked transistors on the input board?
it looks like it is already on the board. The Threshold amps had no feedback from the output stage. It should be just fine.
