You have a laptop ? Test inside your car.
If no lap, bring the PC outside ,
Thing is that you need to test with another source of bass,
Since you don't have another mic to compare you can't tell but you have many other sources , your friends speakers , your neighbors 5.1 systems , your family trucks or cars.
If all of those test the same, means a bad mic or wrong settings.
There is many ways to skin a cat 😺
If no lap, bring the PC outside ,
Thing is that you need to test with another source of bass,
Since you don't have another mic to compare you can't tell but you have many other sources , your friends speakers , your neighbors 5.1 systems , your family trucks or cars.
If all of those test the same, means a bad mic or wrong settings.
There is many ways to skin a cat 😺
Your Settings in rew starting the measurement @ 150 hz ?I am currently measuring my subwoofer with dayton audio umm 6 mic. But in REW its doesn't show any low frequency spl & it show good spl from 150hz..
I m not getting wether it a fault of mic or software..
If any buddy know something about this please let me know.
Attachments
- Home
- Loudspeakers
- Subwoofers
- Calibrated mic issue