In principle, if you have a suitable adapter board to transform a DIP8 single pinout to a SIP pinout corresponding to one half of a Burson dual, it can be done. It could also be done using a small perfboard and some wiring.
BTW, I offer a fully-discrete DIP8 single opamp called the LF03s (which is one half of a DIP8 dual called the LF03d):
http://www.diyaudio.com/forums/analog-line-level/207871-lf03-discrete-opamp-2.html#post3644366
It's comparable in audible sonics to a Burson HD. PM me for details if there's interest.
The burson dual is two separate cards. So all you do is mark the leads and unsolder things. However the cards are not the same! Each is an amp but to get them to pin out as a dual they have different layouts.
- Status
- Not open for further replies.