I'm planning on building a DAC based on this.
The one thing that has been wondering is - the CS4397 has a ~ 2.5V output if you grab just one of the differential outputs (i.e., R- and L-). That's already above the 2.0V send to most amps.
What would the gain be of the Fetishizator circuit and what output level should I be aiming for?
The one thing that has been wondering is - the CS4397 has a ~ 2.5V output if you grab just one of the differential outputs (i.e., R- and L-). That's already above the 2.0V send to most amps.
What would the gain be of the Fetishizator circuit and what output level should I be aiming for?
Come on guys...at least a few comments before I dive elbow deep into my soldering station.
Will this setup deliver the clean vacuum tube sound it purports to? I realize a voltage divider will be needed at the input to drop the signal a bit and I'm following the modifications detailed in the guide (lampizator web site) for a high level, voltage input.
Will this setup deliver the clean vacuum tube sound it purports to? I realize a voltage divider will be needed at the input to drop the signal a bit and I'm following the modifications detailed in the guide (lampizator web site) for a high level, voltage input.
Sorry I can't help, I was looking at the FETishizator a while ago but never got chance to try it, if you do try it please let us know what you think 🙂
- Status
- Not open for further replies.