Building a cabnet for a pair of JBL 2214's

Status
Not open for further replies.
.. Does that mean that there are 2 drivers in this one enclosure?..

Hi,

Yes, All previously shown simulations depicts enclosures using 2 paralleled drivers.

Here follows a simulation using only one driver:

b🙂
 

Attachments

  • 1xJBL_2214_~107L_OD_T-TQWT.JPG
    1xJBL_2214_~107L_OD_T-TQWT.JPG
    261.8 KB · Views: 89
depicts enclosures using 2 paralleled drivers
The original simulation just showed one driver, in the side cut picture of the enclosure. OOOO I see it now, one at 77 inches and one at 59 inches. The one driver that you see in the picture is at 77 inches. The driver I need to add, goes underneath the one that I have?
 
The original simulation just showed one driver, in the side cut picture of the enclosure. OOOO I see it now, one at 77 inches and one at 59 inches. The one driver that you see in the picture is at 77 inches. The driver I need to add, goes underneath the one that I have?

Hi,

The picture:

b🙂
 

Attachments

  • 2x_JBL-2214H-8_OD-T-QWP.JPG
    2x_JBL-2214H-8_OD-T-QWP.JPG
    132.3 KB · Views: 66
Status
Not open for further replies.