I'm in the beginning phase of building a stereo class D amplifier, partly from modules bought through ebay, and parts I have laying around.
This thread will follow the building process step by step.
This have already been done:
1.Decided to build PSU from an 2x33V 250VA toroidal transformer, together with 2x10000µF caps and a 10A rectifier bridge. This is stuff I've had laying around like forever.
2.Decided to build the entire amplifier into an M2A1 ammunition box, as seen on the picture below:
3. Orderer a L15D-Pro module kit from ebay. Will order only one first, to try it out.
I now need to decide how to mount the stuff into the box, any ideas?
This thread will follow the building process step by step.
This have already been done:
1.Decided to build PSU from an 2x33V 250VA toroidal transformer, together with 2x10000µF caps and a 10A rectifier bridge. This is stuff I've had laying around like forever.
2.Decided to build the entire amplifier into an M2A1 ammunition box, as seen on the picture below:
3. Orderer a L15D-Pro module kit from ebay. Will order only one first, to try it out.
I now need to decide how to mount the stuff into the box, any ideas?
Yes it is, but I have six of them, and I don't have any other nice looking box to hold the amplifier.
- Status
- Not open for further replies.