Hi folks,
I have a Bryston 12B where the jacks seem worn out. I've tried new/better/different cables, but I'm still getting bad contact. I also pulled the main board and checked the solder joints. They're good.
Wondering if this is a known issue and whether there are any recommended replacement jacks.
Cheers,
Paul
I have a Bryston 12B where the jacks seem worn out. I've tried new/better/different cables, but I'm still getting bad contact. I also pulled the main board and checked the solder joints. They're good.
Wondering if this is a known issue and whether there are any recommended replacement jacks.
Cheers,
Paul