I have a pair of used Sonus Faber Concertinos I bought and i noticed that at higher volumes I would get an occassional crackling out of one of the speakers. I am driving them with a hafler 280XL...so no clipping is evident...I am wondering if the driver is hurting. If so...Is there a successful was to replace this driver and keep the sound coherent...I believe this was produced by scanspeak.
Hi,
If the sound is a bit like a scratch then your driver is hooped. You can check it by turning the amp off and pushing in on the cone from the dust cap and listening for the scratchy.
If it is more like a crack, then chances are you are bottoming the coil out on the back plate. Provided you haven't done it too many times, you're probably OK. It means the driver is being pushed too hard.
If the sound is a bit like a scratch then your driver is hooped. You can check it by turning the amp off and pushing in on the cone from the dust cap and listening for the scratchy.
If it is more like a crack, then chances are you are bottoming the coil out on the back plate. Provided you haven't done it too many times, you're probably OK. It means the driver is being pushed too hard.
Checked it
Thanks for the tip...I checked both sides and there doesn't seem to be any problem with scratchiness...of course...it could be a tweeter, but then it would do it all the time. The crackling only happens on the left channel...mostly with loud, fast transients like a orchestral tympani smash.
Thanks for the tip...I checked both sides and there doesn't seem to be any problem with scratchiness...of course...it could be a tweeter, but then it would do it all the time. The crackling only happens on the left channel...mostly with loud, fast transients like a orchestral tympani smash.
echelonphoto said:I have a pair of used Sonus Faber Concertinos ...I believe this was produced by scanspeak.
Hi,
Seas 19 mm silk dome tweeter
Seas 140 mm poly cone woofer
Not sure if they was custom or not for SF
Cheers,
Paolo
- Status
- This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.