Broken contact on LCD panel-- Suqqestion to fix??

[blazic]

Hello, yesterday i ripped apart LCD and when i tryed to solder the problem contact from one to another plate(ussualy problem) i saw the unfix contact from the plate and a LCD panel.

So if you have some suggestion to fix this problem please write it down here!😉

I was thinking to get plate closer to LCD panel and then glued it somehowe together and then contacts will be connected but this was just my theory 😀

I picture that problem and here are pictures:

http://www.mobisux.com/album/data/500/25281lcd-contact2.JPG http://www.mobisux.com/album/data/500/25281lcd-contact1.JPG

 

[jpp2004]

LCD panel contact flat cables broken

I have had the same problem. Is this repairable and if so would it cost more than $300AUD?

I am really despirate! I need the contacts (3) fixed otherwise I have chucked $314 down the drain!!!!!!!!!!!!

Please help me. Email me on jpp2004@tpg.com.au.