• These commercial threads are for private transactions. diyAudio.com provides these forums for the convenience of our members, but makes no warranty nor assumes any responsibility. We do not vet any members, use of this facility is at your own risk. Customers can post any issues in those threads as long as it is done in a civil manner. All diyAudio rules about conduct apply and will be enforced.

Brian GT LM3875 dual-mono chipamp kit

Status
This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.
I bought this kit back in January from Fire.Bottle who realized he didn't have the time to build it. Well, 5 months later, I realized the same.

I paid $100, how about $65 for the whole sheebang?

Complete dual mono basic kit with some extra parts (group buy?) - including two Avel-Linberg 2x115V/2x22V(3.64A) transformers with mounting hardware and a custom volume knob, 4 extra Panasonic FC 1000uf/50V capacitors, high quality rca jacks.

The Avel transformers still sell for $38.79 each at Parts Express

The PCB's look exactly like the Rev. B boards pictured in ChipAmp.com's current Users Guide for the Non-Inverted LM3875 Kit Written by Brian Bell and Sandy H.

Standard parts were:

PCB for two mono channels and power supplies
(4) 1500uf/50V Panasonic FC capacitors
(4) 10uf/50V Panasonic FC capacitors
(16) MUR860 fast diodes
(2) 2.7ohm/2W resistors
(1) ziploc with a pair of resistors and a set of 6 others


An externally hosted image should be here but it was not working when we last tested it.
 
Status
This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.