Hello! im pretty new here and this is my first post. Anyhow, im werry new to sound, and i got some old speakers from a friend to expriment on.
i have tryed to build a box now, a 116l big and 30Hz is the port on. But well i doesnt sound like i whant to
So i wonder if some1 whit more experiens like to calculate a box for me? I want to use it for indoor usage. And ye, i got 2 drivers so i can use Isobark, if it works?
Here is the parameters:
Pyle Pro series II 15"
i have tryed to build a box now, a 116l big and 30Hz is the port on. But well i doesnt sound like i whant to
So i wonder if some1 whit more experiens like to calculate a box for me? I want to use it for indoor usage. And ye, i got 2 drivers so i can use Isobark, if it works?
Here is the parameters:
Pyle Pro series II 15"
Code:
PW15100/4
FS-34HZ
QMS-7.98
QES-.41
QTS-.39
VAS-6.37 CU FT
XMAX-.30 IN
VD-39.8 CU IN
ZMIN-3.2 OHMS
RE-2.8 OHMS
SPL-94 DB
i have tryed to build a box now, a 116l big and 30Hz is the port on. But well i doesnt sound like i whant to
So are both drivers in that one box? What are your box and port dimensions?
What exactly is it you don't like about the sound?
hi there
to calculate a box you have two options:
google all the formulas and calculate, or...
get a program to do it for you.
you put all the parameters of the woofers in the program, and it tells you how your box should be built.
try WinISD, it's free and it's simple what makes it a good starting point. Usually simpler things in paper delivers simple models to construct.
hope to have helped.
cheers
gaston_pdu
to calculate a box you have two options:
google all the formulas and calculate, or...
get a program to do it for you.
you put all the parameters of the woofers in the program, and it tells you how your box should be built.
try WinISD, it's free and it's simple what makes it a good starting point. Usually simpler things in paper delivers simple models to construct.
hope to have helped.
cheers
gaston_pdu
- Status
- This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.