The power stage is config for 16w Class A and then to 50w in A/B can be set for 25w in class A with 32Vac ,the bias can be set 600mA to up 1,2A with trimmer ,now is 0,9 A with 21°C up ambient
Driver stage- 50VA toroid dual coil plus two dual mono Salas Shunt reg
preferred EU
One channel on pic
Driver stage- 50VA toroid dual coil plus two dual mono Salas Shunt reg
preferred EU
One channel on pic
Attachments
Last edited:
- Status
- This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.