• WARNING: Tube/Valve amplifiers use potentially LETHAL HIGH VOLTAGES.
    Building, troubleshooting and testing of these amplifiers should only be
    performed by someone who is thoroughly familiar with
    the safety precautions around high voltages.

Bogen J130 PA schematic

Status
This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.
I have gotten a nice shape Bogen J130 PA amp.I need a schematic for it.Its not one of the more common Bogens.I think its a late 1940's-early 1950's era,by the design and tube type.Tubes are as follows:1-5UFG rect.,2-6L6G Coke Bottle type,2-Black metal 6FS5,1-6SL7G.1 mic input on side with 1-phono"RCA type"Back panel has David Bogen Co.,Inc.,New York 14,NY.Top on back marked David Bogen J130 or JI30 Series F-76.Any info,leeds,comments or help always welcome.
 
Found out simalar to 53 wide bassman

After looking the ciircuit over and drawing my own schematic.This Bogen J130 is Very simalar to a Fender widebase Bassman.It even shares the same paraphased 6SL7GT phase inverter setup.The tone stack is setup a wee bit different,and 2 6FS5 instead of 6SC7.Overall a good place to start.Thanx all.
 
Status
This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.