Got looking around today and saw my pile of unstuffed boards.
4 channels of Twisted Pear Twisted Bosoz wPS 8 boards
2 channels TP My_Ref Monoblocks
Carlos FM Gainclone
Chip amp gainclone
4 channels look like phono stage dated 8/12/2006
Three boards with 6 outputs each. Must be power supply. I think they are PassDiy, not sure what.
4 channels of Twisted Pear Twisted Bosoz wPS 8 boards
2 channels TP My_Ref Monoblocks
Carlos FM Gainclone
Chip amp gainclone
4 channels look like phono stage dated 8/12/2006
Three boards with 6 outputs each. Must be power supply. I think they are PassDiy, not sure what.
Attachments
The three boards in your second pic with 6 outputs each are Jan's (Delta Audio) Krell KSA-50 boards, not power supply or Pass DIY. Krell KSA 50 pcb
Sorry for the long delay. Family health, work, Easter, and some other details are up all my spare time.
Have padded mailing envelopes and starting to sort out. Also need to add a pair of My_Ref Fremen 1.05 sated May 2013. Extremely nice looking.
So;
My_Ref Fremen (2)
Krell KSA 50 (3)
LM 3875 inverted Gain Clone Tech DIY 2004
TP BOSOZ 4 channels - 8 boards
TP My_Ref (2)
Carlos FM Gainclone by Chipamp.com
Another red gain lone four boards 2 Ps and two GC.
Finally four channels of a preamp. Looks great - power supply, regs, and a 12 bipolar transistor circuit. Cannot remember what is is.
Several are spoken for. I am assigning and will update.
Have padded mailing envelopes and starting to sort out. Also need to add a pair of My_Ref Fremen 1.05 sated May 2013. Extremely nice looking.
So;
My_Ref Fremen (2)
Krell KSA 50 (3)
LM 3875 inverted Gain Clone Tech DIY 2004
TP BOSOZ 4 channels - 8 boards
TP My_Ref (2)
Carlos FM Gainclone by Chipamp.com
Another red gain lone four boards 2 Ps and two GC.
Finally four channels of a preamp. Looks great - power supply, regs, and a 12 bipolar transistor circuit. Cannot remember what is is.
Several are spoken for. I am assigning and will update.
Attachments
I am very interested in both My_Ref Fremen boards. That is two mono PCBs correct?
Yup, My_Ref Fremen 1.05 are mono PCBs... Looking forward to buy these from you, along with the lm318 opamps if you have them to sell.
Last edited:
Yup, My_Ref Fremen 1.05 are mono PCBs... Looking forward to buy these from you, along with the lm318 opamps if you have them to sell.
I do have LM318, even some metal can ones. Now whether I can find them is another issue. Still looking for my ZD-50 boards. That is how I found these.
That would be great. I have no hurry, but if you wish I can go ahead and pay for everything. It´s been a while since I last used paypal, but there shouldn´t be any issuesNow whether I can find them is another issue.
I will look.
I will need a box for you. I think I have a couple stuffed boards with LDR’s in the attic. I do have some LDR’s in a parts box. But the ones mounted on a PCB are matched. Just need a power supply and pot to adjust resistance. I built many of them years ago.
I do not have SM LM318. All The My_Ref I stuffed used 8DIP. Picked up some metal cans to try. Never tried to install. None of the MyRefs were socketed.
The Evo’s I have came with SM LM318 installed by Mauro. Been trying to get the courage to swap for for LM4562. But have hotter irons right now.
Could I also buy a few of your unmatched LDRs for experiments? They are said to sound very good.
I will need a box for you. I think I have a couple stuffed boards with LDR’s in the attic. I do have some LDR’s in a parts box. But the ones mounted on a PCB are matched. Just need a power supply and pot to adjust resistance. I built many of them years ago.
I do not have SM LM318. All The My_Ref I stuffed used 8DIP. Picked up some metal cans to try. Never tried to install. None of the MyRefs were socketed.
The Evo’s I have came with SM LM318 installed by Mauro. Been trying to get the courage to swap for for LM4562. But have hotter irons right now.
- Status
- This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.