6" solid fixed wheels and a grab bar on the back. They are their own dolly.
C'mon guys I just showed the pic so you knew how easy it was to reduce it without losing a whole lot of quality. If you want more info, email me and I'd be happy to send pics.
C'mon guys I just showed the pic so you knew how easy it was to reduce it without losing a whole lot of quality. If you want more info, email me and I'd be happy to send pics.
It took Cal, Leadbelly and a couple other guys just to lift the **small** set in/out of his truck 

Geek said:
AF - I sent you an email. Please respond 🙂
Geek,
Could you please resend it.... It never arrived here. Please email me direct to webmaster.
A little OT, but what's happening with your server? All of a sudden it's taking ages to open a thread page.
I thought it might be on my end, but I tried a dozen other busy sites and they open their threads normally.
I thought it might be on my end, but I tried a dozen other busy sites and they open their threads normally.
Hi AF,
Done!
Thanks for your time. I know you're busy with the upgrade 🙂
Cheers!
AudioFreak said:Could you please resend it.... It never arrived here. Please email me direct to webmaster.
Done!
Thanks for your time. I know you're busy with the upgrade 🙂
Cheers!
Hi Cal,
I do have to agree with Andrew though. Small details on schematics are often hard to make out. Things like part numbers and other small (important) details. I don't have an example close at hand, but over the years I have come up against this many times myself.
-Chris 🙂
I do have to agree with Andrew though. Small details on schematics are often hard to make out. Things like part numbers and other small (important) details. I don't have an example close at hand, but over the years I have come up against this many times myself.
-Chris 🙂
My problem with our forum is that i cannot have a good feedback about my postings
here something i have said into the Dx Amplifier thread:
Boys, i am not an arrogant man, so i do not know if those things i am posting have Post #5852
...................................
"interest to you or not.
My control is the hit counter..... when i start some new subject i use to memorize the hit counter number and then i can evaluate 48 hours after starting, if people is visiting.
But the quality of this hits i cannot know....if people is reading with interest, if they will be following and reading the stuff or not...if they are perceiving as boring or something already knew without any importance."
.........................................
So...not only how much folks are reading..but how long they spent reading.... have they saved the images attached?... the quality of the hits are important, as we do not know if what we are doing are good for them (and so we go on) or not good for them (and so we gonna stop)
regards,
Carlos
here something i have said into the Dx Amplifier thread:
Boys, i am not an arrogant man, so i do not know if those things i am posting have Post #5852
...................................
"interest to you or not.
My control is the hit counter..... when i start some new subject i use to memorize the hit counter number and then i can evaluate 48 hours after starting, if people is visiting.
But the quality of this hits i cannot know....if people is reading with interest, if they will be following and reading the stuff or not...if they are perceiving as boring or something already knew without any importance."
.........................................
So...not only how much folks are reading..but how long they spent reading.... have they saved the images attached?... the quality of the hits are important, as we do not know if what we are doing are good for them (and so we go on) or not good for them (and so we gonna stop)
regards,
Carlos
UPDATE
Thanks for all the comments. We will be locking the main forums within the next 48hrs to proceed with the transition. We expect to launch the new site some time early in April.
Thanks for all the comments. We will be locking the main forums within the next 48hrs to proceed with the transition. We expect to launch the new site some time early in April.
This is going to be great. Thanks for the update!
Got your email BTW, waiting for the new forums 😀
Good luck guys!
Got your email BTW, waiting for the new forums 😀
Good luck guys!
Upgrade
Thanks for your efforts and I wish you success. Think how many people your forum has helped so far!
Thanks for your efforts and I wish you success. Think how many people your forum has helped so far!
cuibono said:Think how much frustration your forum has caused!!
😉
LOL!
And solved 😀
edgebc said:...and splinters..........
...and cuts and gouges and bruised thumbs...

Offline April 2nd, Back Online April 9th
OK, we have the date that we will go online with the new software. That will be the 9th of April. It turns out that we won't have to be offline as long as we thought, so we won't be locking things down until the 2nd of April.
That means that life here will continue as always until April 2nd.
Mark Cronander
OK, we have the date that we will go online with the new software. That will be the 9th of April. It turns out that we won't have to be offline as long as we thought, so we won't be locking things down until the 2nd of April.
That means that life here will continue as always until April 2nd.
Mark Cronander
"..............life here will continue as always until April 2nd............."
😱
No life till the 9th .....?
OK everybody....Sayonara ...Aufwiedersehen...Goodbye...etc....
Meet you all on the otherside ....😀
I'm stocked up to bridge the week of excruciating silence ..

😱
No life till the 9th .....?

OK everybody....Sayonara ...Aufwiedersehen...Goodbye...etc....

Meet you all on the otherside ....😀
I'm stocked up to bridge the week of excruciating silence ..



I believe that there will be a temporary forum here for us to keep in touch during that long week................................😱
- Status
- Not open for further replies.
- Home
- Site
- Site Announcements
- Big forum upgrade ahead - what you need to know!