When I found out that she wasn't as square as I had hoped I just went ahead with paint and stuff.
Boy it sure is loud.
I think the XO needs a little work, there's a peak around 1K that's a bit shouty so I'll probably add a notch.
Boy it sure is loud.
I think the XO needs a little work, there's a peak around 1K that's a bit shouty so I'll probably add a notch.
Attachments
7 - compartment box<- approves
whats the final parts list?
snip
and how long does it run on 6 x D batteries?
1 - Tascam 30wpc PA amp
1 - Energy 125 watt plate amp
2 - Adire Extremis 6.5" woofers
2 - Wharfedale 5.25" mid bass
2 - LG 3" full range
2 - 0.50 mH coils
2 - 125 mfd caps
2 - 80 mfd caps
2 - 20 mfd caps
plus hinges, latches and rockwool insulation totalling about 50 lbs.
120V only
Hi Boydon, thanks for the comments.
The spacing was due to them being separated by a 3/4" divider and the fact that I'm not happy crowding the drivers against a wall. Thanks for the compliment on the work but it really did turn into a utility cabinet when I realized the slight twist which eliminated the chance to use a piano hinge.
The spacing was due to them being separated by a 3/4" divider and the fact that I'm not happy crowding the drivers against a wall. Thanks for the compliment on the work but it really did turn into a utility cabinet when I realized the slight twist which eliminated the chance to use a piano hinge.
- Status
- This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.