Hi to all and happy Hollydays. I'm new to this forum and this is my first post. I'm a Bass player and I want to build a cabinet for my gigs. So far, I've been considering Eminence DELTA 12LF drivers for the project. Using WinISD, the resulting box has 150 liters two 43 Hz tuned ports and a 41 Hz f3 (with 2 drivers). I need the frecuency response to go up arround 10 Khz, so I need a HF driver. The first question arises, which x-over point should I choose?. The Image below is the published response of the BETA 12LF, how can I evaluate the proper point from this graph?, I guess 1.5 khz is good. the second question, which HF driver will fill these requierements, I was considering eminence PSD2002 compresion driver. The third question, will this system give me a good transient response? I'm a big Slap/Pop tecnique lover so good transient response is a must .
I selected these drivers because of the relative low box volume that they need and the good F3 predicted, but feel free to suggest me any other drivers and/or configurations especially on the HF unit.
Thanks in advance.
I selected these drivers because of the relative low box volume that they need and the good F3 predicted, but feel free to suggest me any other drivers and/or configurations especially on the HF unit.
Thanks in advance.
