Some more detail might help. Maybe post a photo?
If you're referring to this:
Back panel parts kit plus PCB / Transistor / Diode mounting parts kit – diyAudio Store
And the washers are coloured red/black, then they're the insulators for the speaker output binding posts ... that's the best I can do with the intel provided.
If you're referring to this:
Back panel parts kit plus PCB / Transistor / Diode mounting parts kit – diyAudio Store
And the washers are coloured red/black, then they're the insulators for the speaker output binding posts ... that's the best I can do with the intel provided.
They are for customers who purchase a Deluxe chassis with steel rear panel. Those panels are only 1mm thick and the speaker binding posts don't seat properly without a shim. Some customers previously had this problem and nylon washers emerged as the solution. These will do the job 🙂 I'll update the description!
Hey Jason, how are you going? I am building a chassis by ModuShop and I bought the Back Panel Kit from the diyAudio shop. Now I need a few more of the M3 fender washers to affix the end semis to the heatsink. Now I searched everywhere online, but I cannot seem to find that particular size. What I am measuring is the outside diameter is 15.88mm / 0.625", the inside diameter is 3.65mm / 0.14", and the thickness is 0.84mm, made from stainless steel.
Can you please point me to a company / Amazon / eBay vendor that offers these washers?
Can you please point me to a company / Amazon / eBay vendor that offers these washers?
Those don't need to be exact matches. Any fender washer of approximate diameter will work just fine.
Here are some M3 / 15mm OD that I've used in various projects.
Fender Washers From Amazon
Here are some M3 / 15mm OD that I've used in various projects.
Fender Washers From Amazon
- Home
- The diyAudio Store
- Back Panel Kit - nylon washers