Auratone 5C Clone?

sealed-9L-A102-2.jpg


The sealed A10.2eN.

Interestingly, there is an FE127e (2000-2005 vintage) basket sitting on top of the far speaker.

dave
 
IIRC they went through several different drivers. I'm pretty sure it was a CTS full range originally, or at least during one phase. The Pioneer FR may have been used later on, I remember something about that.

IMO the Fostex driver is too good. The point of these was to check a mix for good sound on cheap car radios, TV, clock radio, and that sort of thing. Any cheap highish Qts full range stuck in a sealed box should perform the same task if that's what you're after.

There was a fair amount of discussion about these on the newsgroup rec.audio.pro a couple decades back, if anyone cares to research it.
 
What does a Auratone 5C sound like?
I heard it was a Pioneer 4.5" driver but its not made anymore.
What driver is a good replacement?

This was a recording studio speaker that is suppose to suck but sound like common car stereos and ghetto blasters of the time.

The one and only driver for this in the uk is the incredible cheap L69AW from Maplin
50W 5in Shielded Bass Mid Range Speaker | Maplin


Measurements of the final box are equal to the auratone ones.
 
Hi all,
if someone wants to build this project with drivers used originally by Auratone I have 3 driver models for sale that Auratone used in their 5C speakers.

2x CTS square magnets and 1x Pioneer A11EC80-02F

PM me if interested

UmMLJ88.jpg


J6CN4Ix.jpg